AFS3-00900120-06-13P-6

RF Amplifiers Overview

The AFS3-00900120-06-13P-6 is a microwave amplifier manufactured by L3 Narda-MITEQ. It operates within a frequency range of 9 GHz to 12 GHz. The device provides a nominal gain of 13 dB with a P1dB output power of 20 dBm. Key electrical specifications include a noise figure of 5.5 dB and an input return loss of 15 dB. The unit requires a single positive supply voltage of +15 V DC, drawing a maximum current of 180 mA. It is housed in a compact module package designed for integration into RF systems.

RF Amplifiers Feature Summary

• Provides stable amplification across the C-band frequency spectrum
• Designed for low-noise signal processing applications
• Utilizes a compact module form factor for system integration

RF Amplifiers Applications

• Electronic warfare systems
• Satellite communication ground stations
• Radar receiver front ends

RF Amplifiers Procurement Notes

Verify the specific suffix codes against the manufacturer's official datasheet to ensure compatibility with required interface standards and regulatory compliance. Confirm that the +15 V DC power supply specifications align with your system's power budget and thermal management capabilities before procurement.

RF Amplifiers Selection Notes

Select this component when a 13 dB gain and 20 dBm output power are required within the 9-12 GHz band. Ensure the system can accommodate the 180 mA current draw and +15 V supply requirement. Compare noise figure performance against other available modules if sensitivity is a critical design constraint.

RF Amplifiers Part Context

This part belongs to the AFS3 series of microwave amplifiers from L3 Narda-MITEQ. The series typically offers various gain and frequency configurations in a standardized module format. This specific model targets applications requiring moderate gain and high linearity in the C-band range.

RF Amplifiers Replacement Considerations

Consult the manufacturer's official cross-reference documentation for verified substitute part numbers. Do not assume functional equivalence with other models in the AFS3 series without verifying pinout, electrical parameters, and mechanical dimensions.