AM1995B1592

Overview

The AM1995B1592 is a ceramic band pass filter manufactured by Anatech Electronics Inc. It operates with a center frequency of 1.995 GHz and provides a bandwidth of 30 MHz. The component features a 50 Ohm impedance and is housed in an 8-SMD module package measuring 14x13 mm with a maximum height of 4.50 mm. Key electrical specifications include insertion loss of less than 2.5 dB within the 1980-2010 MHz range and greater than 38 dB rejection at 25 MHz offset. Additional performance metrics indicate insertion loss below 2.0 dB for the 2047.5-2072.5 MHz range.

Feature Summary

• Utilizes ceramic construction for stable RF signal filtering
• Designed for precise band pass applications at 1.995 GHz
• Offers high rejection characteristics outside the passband

Applications

• LTE Frequency Band 1 filtering
• RF communication systems requiring 1.995 GHz center frequency
• Signal processing modules needing 50 Ohm impedance matching

Procurement Notes

Verify the specific datasheet version from Anatech Electronics Inc. to confirm exact insertion loss and rejection values, as these may vary slightly between production batches. Ensure the SMD-8P footprint dimensions align with your PCB layout requirements before finalizing procurement decisions.

Selection Notes

Select this component when a fixed 1.995 GHz center frequency with 30 MHz bandwidth is required. The 50 Ohm impedance matches standard RF transmission lines. Consider the 8-SMD package size for space-constrained designs where ceramic filter stability is preferred over tunable alternatives.

Part Context

This part belongs to the Ceramic Filters category produced by Anatech Electronics Inc. It is specifically engineered for RF applications requiring sharp cutoff characteristics. The manufacturer lists it alongside other diplexers and power dividers, indicating its role in complex RF front-end architectures.

Replacement Considerations

No public confirmed substitute part numbers are available in the provided documentation. Verify compatibility with existing circuit designs if considering alternative manufacturers, as ceramic filter characteristics are often proprietary.