AMF-4F-04000800-07-10P

Overview

The AMF-4F-04000800-07-10P is a general-purpose RF amplifier module manufactured by L3 Narda-MITEQ. It operates within the frequency range of 4 GHz to 8 GHz, making it suitable for GPS and broadband applications. The device provides a typical gain of 40 dB with a low noise figure of 0.7 dB. It requires a supply voltage of 15 V and draws a maximum current of 150 mA. The unit is housed in a compact module package designed for integration into various radio frequency systems.

Feature Summary

• Provides high linear amplification with 40 dB gain across the 4-8 GHz band
• Features ultra-low noise performance with a 0.7 dB noise figure
• Designed as a general-purpose RF amplifier module for versatile integration

Applications

• GPS signal amplification
• Broadband communication systems
• Radio frequency subsystems

Procurement Notes

Verify the specific datasheet version and electrical tolerances directly with L3 Narda-MITEQ or authorized distributors before procurement. Confirm that the 15V supply requirement and 150mA current draw align with the target system power budget. Ensure thermal management solutions are adequate for the module's operating conditions. Cross-reference the pinout configuration with the official documentation to prevent interface mismatches during integration.

Selection Notes

Select this component when a wide bandwidth covering 4 to 8 GHz is required alongside high gain and minimal signal degradation. The low noise figure makes it appropriate for sensitive receiver front-ends. Consider the module form factor for space-constrained designs. Evaluate the 15V supply constraint against available power rails. Compare against other AMF series variants if specific frequency ranges or gain levels differ from these requirements.

Part Context

This part belongs to the AMF series of RF amplifiers from L3 Narda-MITEQ, which offers modular solutions for microwave and radio frequency applications. The series includes various models tailored for different frequency bands and power levels. This specific model targets the C-band and upper L-band spectrum, serving as a bridge between lower frequency components and higher frequency millimeter-wave devices in complex RF chains.

Replacement Considerations

Consult official substitution guides for direct replacements. Verify compatibility of frequency range, gain, and noise specifications. Check pinout and enclosure dimensions for mechanical fit. Ensure supply voltage and current requirements match the existing design constraints.