AP1302CSSL00SMGA0-DR

Overview

The onsemi AP1302CSSL00SMGA0-DR is a high-performance, ultra-low-power inline digital image and video stream processor supporting resolutions up to 13 megapixels (4224x3156) at 30 fps. It features dual MIPI sensor interfaces with up to 4 lanes for the primary camera and 3 lanes for the secondary camera, operating at speeds up to 1.2 Gbps per lane. The device processes data using dual 32-bit RISC cores and includes an embedded JPEG encoder. Supply voltages are 1.2 V for the core and 1.8 V for I/O. It operates within an ambient temperature range of -30°C to +70°C and a junction temperature range of -30°C to +85°C.

Feature Summary

• Supports advanced imaging functions including auto exposure, auto white balance, and auto focus.
• Includes hardware-accelerated face detection and flexible synchronization capabilities.
• Features programmable JPEG encoding with EXIF header support and MJPEG video compression.
• Optimized for operation with Clarity+ Pixel technology sensors and video interlaced HDR.

Applications

• Internet of Things devices
• Drones
• Machine vision systems
• AR/VR/MR applications
• Video conferencing

Procurement Notes

Verify that the specific ordering suffix matches the required package type and tape-and-reel configuration. Confirm compatibility with the target host processor interface requirements. Ensure firmware patches and calibration settings are available from the manufacturer for proper initialization. Check for any regional distribution restrictions or supply limitations before finalizing procurement plans.

Selection Notes

Select this component when a compact solution for high-resolution image processing is required without external frame buffers. Consider its dual-sensor capability if 3D bridging or multi-camera setups are needed. Evaluate power consumption constraints as it is designed for ultra-low-power operation. Verify that the MIPI interface speed meets the bandwidth requirements of the connected sensors.

Part Context

This part belongs to the AP1302 family of digital image processors from onsemi. It is specifically designed to interface with CMOS image sensors and perform real-time image enhancement. The device integrates necessary processing blocks to produce DSC quality images directly from sensor input, reducing system complexity by eliminating the need for large external memory buffers.

Replacement Considerations

No public confirmed substitute part numbers are available in the provided documentation.

FAQ

Does the AP1302 require external frame buffers?

No, all advanced features are supported with on-chip memory and do not require any external full or partial frame buffer.

What is the maximum resolution supported by the AP1302?

The AP1302 supports a maximum resolution of 4224x3156 pixels, which corresponds to 13 megapixels.

Can the AP1302 handle 3D bridging applications?

Yes, it supports dual sensor interfaces allowing simultaneous processing of two independent streams for 3D bridging applications, though merging is performed by the host.