AP7341-135FS4-7

$0.11

Description：IC REG LINEAR 1.35V X2-DFN10104
Series：-
Mfr：Diodes Incorporated
Package：Tape & Reel (TR)

SKU:8a02a863514b Category: Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Brand: Diodes Incorporated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

AP7341-135FS4-7 is listed in the Voltage Regulators - Linear, Low Drop Out (LDO) Regulators range at ChipApex. The manufacturer field lists Diodes Incorporated. Its product description is IC REG LINEAR 1.35V X2-DFN10104. Review the specifications below when checking this part for your BOM.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators specifications for AP7341-135FS4-7

Description：IC REG LINEAR 1.35V X2-DFN10104
Series：-
Mfr：Diodes Incorporated
Package：Tape & Reel (TR)
Output Configuration：Positive
Output Type：Fixed
Number of Regulators：1
Voltage - Input (Max)：5.25V
Voltage - Output (Min/Fixed)：1.35V
Voltage - Output (Max)：-
Voltage Dropout (Max)：0.62V @ 150mA
Current - Output：300mA
Current - Quiescent (Iq)：50 µA
Current - Supply (Max)：-
PSRR：75dB (1kHz)
Control Features：Enable
Protection Features：Over Current
Operating Temperature：-40°C ~ 85°C
Mounting Type：Surface Mount
Package / Case：4-XDFN Exposed Pad
Supplier Device Package：X2-DFN1010-4

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators datasheet and documents for AP7341-135FS4-7

AP7341-135FS4-7

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Overview

The AP7341-135FS4-7 is a fixed-output low dropout regulator manufactured by Diodes Incorporated. It provides a nominal output voltage of 1.35V with a maximum guaranteed output current of 300mA. The device operates within an input voltage range of 1.7V to 5.25V and features a typical ripple rejection ratio of 75dB at 1kHz. Quiescent current is specified as low as 35µA, while the output noise voltage is typically 60µVrms across a 10Hz to 100kHz bandwidth. The component is housed in an X2-DFN1010-4 package.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Feature Summary

Integrated enable pin for power control
Built-in short circuit protection
Low output noise performance

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Applications

Smart Phone/Pad
RF Supply
Cameras
Portable Video
Wireless Communication

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Procurement Notes

Verify the specific output voltage accuracy grade required for the application, as multiple grades exist based on tolerance specifications. Confirm that the non-discharge version matches the system requirements, as discharge options are available. Ensure the ordering suffix corresponds to the desired tape and reel packaging format before finalizing procurement.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Selection Notes

Select this component when a stable 1.35V rail is needed from a single-cell lithium battery or similar supply. The wide input voltage range supports various source conditions. Verify that the load transient response and capacitor ESR requirements align with the stability graphs provided in the datasheet to ensure reliable operation under dynamic loads.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Part Context

This part belongs to the AP7341 series of CMOS low dropout regulators designed for handheld communication equipment. The series offers various fixed output voltages ranging from 1.1V to 3.3V. All variants share the same X2-DFN1010-4 footprint, allowing for dense PCB layouts and consistent thermal management strategies across different voltage rails.