SEARCH
— IC芯片 | 连接器 | 传感器 | 被动器件 —
AP7343DQ-28FDZW-7 is listed in the Voltage Regulators - Linear, Low Drop Out (LDO) Regulators range at ChipApex. The manufacturer field lists Diodes Incorporated. Its product description is IC REG LINEAR 2.8V W-DFN2020-6. Review the specifications below when checking this part for your BOM.
The AP7343DQ-28FDZW-7 is an automotive-compliant low dropout regulator manufactured by Diodes Incorporated. It provides a fixed 2.8V output with a guaranteed maximum current of 300mA. The device operates within an input voltage range of 1.7V to 5.25V and features high ripple rejection of 75dB at 1kHz alongside low output noise of 60µVrms from 10Hz to 100kHz. Quiescent current is as low as 35µA, and the unit supports an operating temperature range from -40°C to +125°C. It utilizes W-DFN2020-6 (SWP) Type A1 packaging.
Verify that the specific part number suffix FDZW corresponds to the W-DFN2020-6 (SWP) Type A1 package configuration required for your PCB layout. Confirm the D suffix indicates the inclusion of the internal discharge resistor network. Ensure compliance with RoHS and halogen-free requirements if mandated by your assembly specifications.
Select this component when a fixed 2.8V rail is required with integrated output discharge capabilities. The W-DFN2020-6 package offers a compact footprint for dense layouts. Verify that the 300mA load current does not exceed thermal limits given the specific ambient conditions and copper area available on the board.
This device belongs to the AP7343Q family of low dropout regulators designed for automotive electronics. The series includes variants with different output voltages and packages. The 'D' designation specifically denotes the version equipped with an auto-discharge feature, distinguishing it from standard versions lacking this function.
AP7343Q-28FDZW-7
The 'D' suffix indicates that the regulator includes an integrated N-channel auto-discharge resistor to rapidly pull down the output voltage when the enable pin is deactivated.
The datasheet recommends connecting the exposed pad to ground or leaving it open, but advises using a large copper area for thermal dissipation rather than relying on it solely as a ground electrode.
Explore related parts through Power Management (PMIC), Integrated Circuits (ICs), all product categories, ChipApex homepage.