SEARCH
— IC芯片 | 连接器 | 传感器 | 被动器件 —
AP7350-18CF4-7 is listed in the Voltage Regulators - Linear, Low Drop Out (LDO) Regulators range at ChipApex. The manufacturer field lists Diodes Incorporated. Its product description is IC REG LINEAR 1.8V X2-WLB0606-4. Review the specifications below when checking this part for your BOM.
The AP7350-18CF4-7 is a fixed-output low dropout regulator manufactured by Diodes Incorporated, providing a stable 1.8V output with a guaranteed maximum load current of 150mA. It operates within an input voltage range of 2.0V to 5.25V and achieves high output voltage accuracy of ±1%. The device features an ultra-low quiescent current of 0.25µA and a typical standby current of 0.02µA when the enable pin is deactivated. Designed for minimal board space consumption, it utilizes the X2-WLB0606-4 wafer level chip scale package.
Verify that the specific part number suffix CF4 corresponds to the X2-WLB0606-4 package configuration required for your PCB layout. Confirm that the non-discharge variant matches your circuit's requirement for output state retention during shutdown. Ensure environmental compliance requirements align with the RoHS and Halogen-free specifications documented in the manufacturer datasheet.
Select this component when minimizing footprint is critical due to its industry-leading small package dimensions. Choose this regulator for applications requiring extremely low static power draw to maximize battery longevity in portable devices. Ensure the input voltage remains above the dropout threshold to maintain regulation under maximum load conditions.
This device belongs to the AP7350 series of ultra-low quiescent current LDOs from Diodes Incorporated. The series offers various fixed output voltages ranging from 1.2V to 4.5V. All variants share the same miniature X2-WLB0606-4 package and core electrical characteristics, differing primarily in their internal resistor networks that set the specific output voltage levels.
AP7350D-18CF4-7
No, the standard AP7350 variant does not include an active output discharge feature. To achieve active discharge upon shutdown, the AP7350D version must be selected.
The datasheet recommends using a minimum 0.1µF ceramic input capacitor and a 0.1µF ceramic output capacitor placed as close to the device pins as possible to ensure stability and transient response.
Explore related parts through Power Management (PMIC), Integrated Circuits (ICs), all product categories, ChipApex homepage.