SEARCH
— IC芯片 | 连接器 | 传感器 | 被动器件 —
AP7353D-18FS4-7 is listed in the Voltage Regulators - Linear, Low Drop Out (LDO) Regulators range at ChipApex. The manufacturer field lists Diodes Incorporated. Its product description is IC REG LINEAR 1.8V X2-DFN10104. Review the specifications below when checking this part for your BOM.
The AP7353D-18FS4-7 is a fixed-output low dropout regulator manufactured by Diodes Incorporated, providing a stable 1.8V output with a maximum current of 250mA. It operates within an input voltage range of 2.0V to 5.5V and features ultra-low quiescent current of 18µA typical. The device incorporates high ripple rejection of 90dB at 1kHz and low output noise of 10µVrms. Packaged in the X2-DFN1010-4 (Type B) footprint, it includes integrated thermal shutdown and short-circuit protection.
Verify that the specific part number suffix FS4 corresponds to the X2-DFN1010-4 package type and D indicates the presence of the output discharge feature. Confirm RoHS compliance status and ensure the ordering quantity matches the standard tape and reel packaging specifications provided by the manufacturer.
Select this component when a compact surface-mount solution is required for battery-powered applications needing high line regulation and minimal standby current consumption. Ensure the PCB layout accommodates the exposed pad for optimal thermal dissipation and stability requirements are met with appropriate ceramic capacitors.
This device belongs to the AP7353 series of low dropout regulators designed for handheld and wearable electronics. The series offers various fixed output voltages ranging from 1.8V to 4.7V, catering to diverse logic and analog supply needs while maintaining a small physical footprint.
AP7353-18FS4-7
The 'D' suffix indicates that the regulator includes an internal N-channel auto-discharge resistor connected to the output, which rapidly pulls down the output voltage when the enable pin is deactivated.
The regulator is turned on by driving the EN pin high and enters shutdown mode when pulled low. If always-on operation is desired, the EN pin should be tied directly to the IN pin.
Explore related parts through Power Management (PMIC), Integrated Circuits (ICs), all product categories, ChipApex homepage.