ChipApex | Global Electronic Components Supplier
SEARCH
Search Product
Search Post
— IC芯片 | 连接器 | 传感器 | 被动器件 —
Consult the customer manager about the wholesale price.
consultation hotline：86-132-6715-2157
email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.
Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.
Product Detailed Parameters
- Description：BUZZER MAGNETIC 1.5V 12MM TH
- Series：AT
- Mfr：PUI Audio, Inc.
- Package：Tray
- Driver Circuitry：Transducer, Externally Driven
- Input Type：Peak-Peak Signal
- Frequency：2.048kHz
- Technology：Electromechanical/Magnetic
- Operating Mode：Single Tone
- Duration：-
- Sound Pressure Level (SPL)：85dB @ 1.5V, 10cm
- Current - Supply：20mA
- Port Location：Top
- Operating Temperature：-20°C ~ 70°C
- Approval Agency：-
- Ratings：-
- Ingress Protection：-
- Mounting Type：Through Hole
- Termination：PC Pins
- Height - Seated (Max)：0.343" (8.70mm)
- Voltage - Rated：1.5 V
- Voltage Range：1 ~ 2V
- Size / Dimension：0.472" Dia (12.00mm)
Download product information
Overview
The PUI Audio AT-1220-TT-10-R is an electromagnetic buzzer transducer designed for through-hole PCB mounting. It operates at a resonant frequency of 2.048 kHz with a sound pressure level of 85 dBA. The device accepts a supply voltage range of 1 V to 2 V and draws a current of 20 mA. Its impedance is not explicitly listed in the provided source data, but it features solder pin termination. The unit measures 12 mm in length and width, with a height of approximately 9.5 mm.
Feature Summary
- Electromagnetic transduction mechanism for audible signaling
- Through-hole solder pin termination for secure PCB integration
- Optimized for operation at 2.048 kHz resonant frequency
Applications
- Electronic equipment status indication
- Alarm systems requiring specific tone frequencies
- Consumer appliance control panels
Procurement Notes
Verify the exact operating voltage requirements against your circuit design, as the datasheet indicates a range of 1 V to 2 V. Confirm that the 20 mA current draw is supported by your power supply. Ensure the PCB footprint matches the 12 mm x 12 mm dimensions and 9.5 mm height clearance. Check RoHS compliance documentation if required for your manufacturing standards.
Selection Notes
Select this component when a specific 2.048 kHz tone is required rather than a broad-spectrum buzz. Compare its 85 dBA output against louder alternatives like the AT-1224-TWT-5V-2-R if higher volume is needed. Consider the lower voltage operation (1-2 V) compared to standard 3 V or 5 V buzzers for low-power applications.
Part Context
This part belongs to the AT series of transducers from PUI Audio. It is distinct from piezoelectric variants and other electromagnetic models in the lineup. The suffix '10' typically denotes specific electrical characteristics within the series, differentiating it from the base AT-1220-TT-R model.
Replacement Considerations
The AT-1220-TT-R is a similar through-hole electromagnetic buzzer in the same series. Verify if the current rating and voltage tolerance of the base model meet your specific circuit constraints before substitution.
