AT03-01-10dB

Attenuators Overview

The AT03-01-10dB is a precision coaxial attenuator manufactured by WITHWAVE CO LTD. It provides a fixed attenuation value of 10 dB with a tolerance of ±1.5 dB. The component operates within a frequency range of 0 Hz to 40 GHz and maintains a characteristic impedance of 50 Ohms. It features a 2.92mm in-line module package, designed for high-frequency applications requiring stable signal reduction. The device supports a power handling capacity of 1 Watt.

Attenuators Feature Summary

• Provides precise signal attenuation for high-frequency RF systems
• Utilizes a robust 2.92mm in-line connector interface
• Maintains consistent performance across a wide bandwidth up to 40 GHz

Attenuators Applications

• High-frequency test and measurement equipment
• RF signal conditioning in communication systems
• Calibration setups requiring fixed attenuation values

Attenuators Procurement Notes

Verify the specific datasheet version from WITHWAVE CO LTD or authorized distributors to confirm mechanical dimensions and electrical tolerances. Ensure compatibility with 2.92mm mating connectors. Check for any specific handling requirements regarding high-frequency components to prevent damage to the precision interface during installation.

Attenuators Selection Notes

Select this component when a fixed 10 dB attenuation is required within a 50 Ohm system operating up to 40 GHz. Consider the 2.92mm form factor for integration into existing high-frequency test fixtures. Evaluate the 1W power rating against the expected signal levels to ensure reliable operation without thermal degradation.

Attenuators Part Context

This part belongs to the AT03 series of precision attenuators from WITHWAVE CO LTD. The series includes variants with different attenuation values, such as 1dB and 20dB, all sharing similar 2.92mm in-line packaging and 40 GHz frequency capabilities. These components are designed for consistency in high-performance RF environments.

Attenuators Replacement Considerations

Direct substitutes include other models within the same AT03 series, specifically the AT03-01-1dB and AT03-01-20dB, which share identical mechanical interfaces and frequency ranges but offer different attenuation levels. Cross-brand replacements must match the 2.92mm connector type and 40 GHz specification.