ATSAML11D15A-MUTKPH

Description：IC MCU 32BIT 32KB FLASH 24VQFN
Series：SAM L11
Mfr：Microchip Technology
Package：Tape & Reel (TR),Cut Tape (CT)
Core Processor：ARM® Cortex®-M23

SKU:17eacdba65c5 Category: Microcontrollers Brand: Microchip Technology

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

Product Detailed Parameters

Description：IC MCU 32BIT 32KB FLASH 24VQFN
Series：SAM L11
Mfr：Microchip Technology
Package：Tape & Reel (TR),Cut Tape (CT)
Core Processor：ARM® Cortex®-M23
Core Size：32-Bit Single-Core
Speed：32MHz
Connectivity：I2C, LINbus, SPI, UART/USART
Peripherals：Brown-out Detect/Reset, DMA, POR, PWM, WDT
Number of I/O：17
Program Memory Size：32KB (32K x 8)
Program Memory Type：FLASH
EEPROM Size：2K x 8
RAM Size：8K x 8
Voltage - Supply (Vcc/Vdd)：1.62V ~ 3.63V
Data Converters：A/D 5x12b; D/A 1x10b
Oscillator Type：Internal
Operating Temperature：-40°C ~ 85°C (TA)
Mounting Type：Surface Mount
Supplier Device Package：24-VQFN (4x4)
Package / Case：24-VFQFN Exposed Pad
Grade：-
Qualification：-

Download product information

ATSAML11D15A-MUTKPH

Overview

The ATSAML11D15A-MUTKPH is a 32-bit microcontroller from the Microchip SAM L11 family, built on the ARM Cortex-M23 core. It integrates 32KB of Flash memory and 2KB of EEPROM, supported by 8KB of SRAM. The device operates at a maximum frequency of 32MHz with a supply voltage range of 1.62V to 3.63V. It features five 12-bit ADC channels and one 10-bit DAC. Connectivity includes I2C, LINbus, SPI, and UART/USART interfaces. The component is housed in a 24-VQFN package and supports an operating temperature range of -40°C to 85°C.

Feature Summary

Integrates hardware security features including TrustZone and cryptographic accelerators for secure boot and data protection.
Includes an enhanced Peripheral Touch Controller (PTC) supporting capacitive touch sensing applications.
Provides low-power operation modes optimized for battery-constrained embedded systems.

Applications

Secure consumer electronics requiring trusted execution environments
Battery-powered IoT sensor nodes
Industrial control devices with touch interface requirements

Procurement Notes

Verify the specific suffix KPH against official Microchip documentation to confirm packaging details and moisture sensitivity level. Ensure compatibility with existing board layouts regarding the 24-VQFN footprint. Cross-reference the latest datasheet revision for any errata or design recommendations prior to final production implementation.

Selection Notes

Select this model when a balance of moderate code storage and robust security features is required. The inclusion of the PTC makes it suitable for designs needing integrated touch capabilities without external controllers. Compare against the ATSAML10 series if cryptographic features are not necessary to reduce cost.

Part Context

This part belongs to the SAM L11 family of ultra-low-power microcontrollers. It shares the same core architecture as other variants in the series but offers specific memory configurations and peripheral sets tailored for secure, touch-enabled applications within the 24-pin form factor.