ATTINY24V-10PU

Overview

The ATTINY24V-10PU is an 8-bit AVR microcontroller featuring a high-performance, low-power RISC architecture. It includes 2 Kbytes of in-system programmable Flash memory, 128 bytes of EEPROM, and 128 bytes of SRAM. The device operates at frequencies up to 10 MHz within a voltage range of 1.8 V to 5.5 V. It integrates one 8-bit timer/counter with two PWM channels, one 16-bit timer/counter with two PWM channels, an 8-channel 10-bit ADC, and an on-chip analog comparator. The component is housed in a 14-pin PDIP package.

Feature Summary

• Advanced RISC architecture executing most instructions in a single clock cycle for efficient processing.
• In-system programmable non-volatile memory with Flash, EEPROM, and SRAM for data retention and code storage.
• Integrated peripheral set including dual timer/counters with PWM capabilities and an 8-channel 10-bit ADC.
• Supports multiple low-power sleep modes including Idle, ADC Noise Reduction, Standby, and Power-Down.

Applications

• Low power consumer electronics
• Battery operated systems
• Simple control applications

Procurement Notes

Verify the specific speed grade suffix '10' corresponds to the required 10 MHz operational frequency. Confirm the 'V' designation aligns with the 1.8V minimum operating voltage requirement. Ensure the 'PU' suffix matches the 14-pin PDIP package specification. Check RoHS compliance status if environmental regulations apply to the target assembly process.

Selection Notes

Select this variant when a 1.8V to 5.5V operating range is necessary, as opposed to standard variants requiring higher minimum voltages. The 10 MHz speed grade provides sufficient throughput for basic control tasks while maintaining low power consumption. Consider the 14-pin PDIP package for through-hole prototyping or manufacturing requirements where surface mount options are unsuitable.

Part Context

This component belongs to the ATtiny24/44/84 family of 8-bit AVR microcontrollers manufactured by Microchip Technology. The 'V' suffix indicates support for operation down to 1.8 Volts, distinguishing it from non-V variants that typically require a minimum of 2.7 Volts. The '10' denotes the maximum operating frequency capability.

Replacement Considerations

ATtiny24-10PU

FAQ

What is the difference between the ATTINY24V-10PU and ATTINY24-10PU?

The primary difference is the operating voltage range. The ATTINY24V-10PU supports operation from 1.8V to 5.5V, whereas the ATTINY24-10PU typically requires a minimum voltage of 2.7V.

Does the ATTINY24V-10PU include an internal calibrated oscillator?

Yes, the datasheet specifies an internal calibrated oscillator as part of its special microcontroller features.