AV-9.8433MAGV-T

Crystals Overview

The AV-9.8433MAGV-T is a quartz crystal resonator manufactured by TXC Corporation, designed for automotive applications. It operates at a nominal frequency of 9.8433 MHz with a load capacitance of 8 pF. The component features a 3.2 mm x 2.5 mm surface-mount package and an equivalent series resistance (ESR) of 200 Ohms. It holds AEC-Q200 certification, ensuring reliability in harsh environments. Frequency stability is specified at ±30 ppm from -40°C to +85°C and ±30 ppm at 25°C.

Crystals Feature Summary

• AEC-Q200 certified for automotive grade reliability
• Glass-sealed ceramic construction for environmental protection
• Compact 3.2mm x 2.5mm SMD footprint

Crystals Applications

• Automotive electronic control units
• In-vehicle infotainment systems
• Telematics modules

Crystals Procurement Notes

Verify the specific suffix 'G' indicates glass seal construction and 'V' denotes tape and reel packaging configuration. Confirm that the 200 Ohm ESR matches the target oscillator circuit requirements. Ensure the supplier provides documentation confirming AEC-Q200 compliance status for this specific lot.

Crystals Selection Notes

Select this component when a 9.8433 MHz reference is required for automotive-grade circuits. The 8 pF load capacitance must align with the host oscillator design. Consider the 200 Ohm ESR value against circuit drive level limitations. The wide temperature range supports operation in unconditioned vehicle environments.

Crystals Part Context

This part belongs to the AV Series of automotive crystals from TXC Corporation. These components are engineered specifically for high-reliability vehicular electronics. The series utilizes glass-seal technology to enhance moisture resistance and long-term frequency stability compared to standard commercial-grade alternatives.

Crystals Replacement Considerations

Direct substitutes include other AEC-Q200 certified 9.8433 MHz crystals with identical 8 pF load capacitance and similar physical dimensions. Verify pin compatibility and ESR specifications before substitution.