AW140-EG-G02D

Overview

The AW140-EG-G02D is a single-row male pin header from the AW140 series by ASSMANN WSW Components. It features a 2.54 mm pitch and two contacts designed for board-to-board connections. The connector utilizes gold flash plating on brass terminals and a black insulator. It supports a current rating of 3A and a voltage of 250V, operating within a temperature range of -40°C to 105°C. The total pin length is 11.2mm, with specific segment dimensions of A=5.66mm and B=3.00mm. It employs through-hole solder termination.

Feature Summary

• Single-row straight male pin configuration for direct board interconnection
• Gold flash plated brass contacts ensure reliable signal transmission
• Black insulator housing provides structural integrity and electrical isolation

Applications

• Board-to-board electronic interconnections
• General purpose PCB header applications
• Low-voltage signal routing in consumer electronics

Procurement Notes

Verify the exact part number AW140-EG-G02D against the manufacturer's official documentation to confirm the 2-position count and 11.2mm pin length specifications. Ensure compatibility with mating female headers regarding pitch and height. Cross-reference the gold flash plating requirement if corrosion resistance is critical for the intended environment.

Selection Notes

Select this component when a low-profile, single-row male header with a standard 2.54 mm pitch is required. The 2-contact configuration suits compact designs needing minimal I/O points. Consider the 11.2mm overall height for clearance constraints and verify that the through-hole soldering process aligns with the assembly manufacturing capabilities.

Part Context

This component belongs to the AW140 series, which offers various contact counts and pin lengths. The EG suffix typically denotes specific plating or material characteristics within the Assmann WSW product line. This model represents a basic 2-position variant suitable for simple circuit interfaces where space efficiency and standard pitch are prioritized over high-density requirements.

Replacement Considerations

Compatible substitutes include other 2-pin, 2.54mm pitch male headers from manufacturers such as Molex, Samtec, or Hirose. Ensure replacement parts match the 11.2mm height and gold flash plating specifications to maintain mechanical fit and electrical performance equivalence.