B84111F0000G136

Power Line Filter Modules Overview

The EPCOS B84111F0000G136 is a single-phase, single-stage power line filter designed for normal insertion loss applications. It features a metal housing with flange mounting and threaded post terminals (M5). Rated for 250 VAC/DC at 50-60 Hz, the unit supports a rated current of 36 A at 40°C. Key electrical parameters include an inductance of 430 μH and a maximum leakage current of 0.369 mA. The device withstands DC 1770V (line-line) for 2 seconds and AC 2500V (line-case). Operating temperature ranges from -25°C to +100°C. Dimensions are 72 mm x 46 mm x 26 mm, with a net weight of approximately 130 g.

Power Line Filter Modules Feature Summary

• Single-stage EMI/EMC filtering for single-phase circuits
• Metal housing with flange chassis mounting
• Threaded post terminal connections
• Low leakage current design

Power Line Filter Modules Applications

• Industrial machinery power inputs
• Medical equipment power supplies
• Office automation devices
• General industrial control systems

Power Line Filter Modules Procurement Notes

Verify the specific suffix G136 against official TDK/EPCOS documentation to confirm terminal type and certification status. Ensure the application environment stays within the specified -25°C to +100°C operating range. Confirm that the required rated current does not exceed 36 A at the relevant ambient temperature. Check for compliance with UL62368-1 and ENEC standards if required by your regional regulations.

Power Line Filter Modules Selection Notes

Select this component when a robust, single-phase filter with high current capacity is needed. The threaded post terminals offer secure mechanical connection compared to quick-connect tabs. Consider the physical dimensions and flange mounting requirements during PCB or chassis layout. Verify that the inductance value provides sufficient attenuation for your specific noise spectrum without causing excessive voltage drop.

Power Line Filter Modules Part Context

This component belongs to the SIFI-F series of power line filters from EPCOS (TDK Electronics). These filters are engineered for general electromagnetic compatibility in single-phase applications. The series offers various current ratings and terminal configurations to suit different installation constraints and performance requirements across industrial and consumer electronics sectors.

Power Line Filter Modules Replacement Considerations

Check for direct substitutes within the B84111F series with different suffixes that may offer alternative terminal types or current ratings. Ensure any replacement maintains the same form factor and mounting hole pattern. Verify that the substitute part meets the same safety certifications and electrical specifications.