B84143V0075R229

Power Line Filter Modules Overview

The B84143V0075R229 is a three-phase sine-wave output filter manufactured by TDK (EPCOS). It features a rated current of 75 A and operates at voltages of 300 V AC or 520 V AC. The unit is designed for chassis mounting with terminal block termination. Operating frequencies are 50 Hz and 60 Hz. Physical dimensions are 440 mm in length, 380 mm in height, and the depth is not explicitly stated in the primary spec but listed as 294mm for similar series models; however, specific model B84143V0075R229 datasheet lists length 440mm and height 380mm.

Power Line Filter Modules Feature Summary

• Provides conducted emission reduction at the mains interface
• Designed specifically for sine-wave output filters in three-phase systems
• Features UL certified insulation system

Power Line Filter Modules Applications

• Sine-wave output filters for 3-phase systems
• Reduction of conducted emissions at the mains interface
• Panel-mounted line-side EMC filtering applications

Power Line Filter Modules Procurement Notes

Verify the specific ordering code suffix to ensure correct housing and terminal configuration. Confirm voltage ratings match the application requirements of either 300 V AC or 520 V AC. Check for UL certification compliance if required by local safety standards. Ensure chassis mounting space accommodates the specified physical dimensions.

Power Line Filter Modules Selection Notes

Select this component when a single-stage EMI/EMI line filter is required for three-phase delta systems. It is suitable for applications where panel-mounted solutions are acceptable. Consider the 75 A current rating and 50/60 Hz frequency range. Ensure the installation environment supports chassis mounting and terminal block connections.

Power Line Filter Modules Part Context

This part belongs to the B84143V series of power line filters from TDK Electronics. The series includes various current ratings and configurations for drive and inverter applications. It is distinct from the B84143Q series, which provides IP21 housing for sine-wave output filters. The B84143V series focuses on high-current chassis-mounted solutions.

Power Line Filter Modules Replacement Considerations

Check for direct substitutes within the B84143V series with different current ratings such as B84143V0039R229 or B84143V0050R229. Verify that any replacement maintains the same terminal block interface and chassis mounting footprint. Ensure the substitute part supports the required 300 V AC or 520 V AC operating voltage.