BA4560N

Description：IC OPAMP GP 2 CIRCUIT 8SIP
Series：-
Mfr：Rohm Semiconductor
Package：Tube

SKU:e19cfe913141 Category: Instrumentation, Op Amps, Buffer Amps Brand: Rohm Semiconductor

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

Product Detailed Parameters

Description：IC OPAMP GP 2 CIRCUIT 8SIP
Series：-
Mfr：Rohm Semiconductor
Package：Tube
Amplifier Type：General Purpose
Number of Circuits：2
Output Type：-
Slew Rate：4V/µs
Gain Bandwidth Product：10 MHz
Current - Input Bias：50 nA
Voltage - Input Offset：500 µV
Current - Supply：-
Current - Output / Channel：25 mA
Voltage - Supply Span (Min)：8 V
Voltage - Supply Span (Max)：30 V
Operating Temperature：-40°C ~ 85°C
Grade：-
Qualification：-
Mounting Type：Through Hole
Package / Case：8-SIP
Supplier Device Package：8-SIP
-3db Bandwidth：-

Download product information

BA4560N

Overview

The BA4560N is a dual operational amplifier in an 8-pin SIP package. It features a gain bandwidth product of 10 MHz and a slew rate of 4 V/ms. The input offset voltage is typically 0.5 mV with a maximum of 6.0 mV, while the input bias current is typically 50 nA. High-amplitude voltage gain reaches 100 dB, and common-mode rejection ratio is typically 90 dB. Power supply voltage ranges from ±4 V to ±15 V (8 V to 30 V total), with a maximum power dissipation of 900 mW.

Feature Summary

Built-in output short-circuit protection circuit
Internal phase correction for stability
No latch-up behavior under stress conditions
Wide range of common-mode and differential input voltages

Applications

Active filters
Audio amplifiers
Voltage-controlled oscillators (VCOs)
General electronic circuits

Procurement Notes

Verify component authenticity through authorized distributors or direct manufacturer channels. Confirm RoHS compliance status and specific manufacturing lot codes against the latest datasheet revisions. Ensure proper handling procedures are followed during storage and assembly to maintain electrical integrity and prevent electrostatic discharge damage.

Selection Notes

Select this component for applications requiring high output current and improved frequency characteristics compared to older dual op-amp designs. Consider the 8-pin SIP package for through-hole mounting requirements. Evaluate thermal management needs as power dissipation limits vary with ambient temperature and package type.

Part Context

This device belongs to the BA4560 family, which includes the BA4560 (DIP) and BA4560F (SOP). All variants share identical electrical specifications but differ in physical packaging. The BA4560N specifically utilizes an 8-pin Single In-line Package suitable for standard PCB layouts requiring through-hole technology.