BD8210EFV-E2

Full Half-Bridge (H Bridge) Drivers Overview

The BD8210EFV-E2 is a system motor driver manufactured by ROHM Semiconductor, designed for multi-channel motor control applications. It operates within a supply voltage range of 4.5 V to 8 V and draws a typical operating supply current of 18 mA. The device features six output channels and supports a maximum switching frequency of 100 kHz. It is housed in an HTSSOP-54 surface-mount package with a power dissipation rating of 2 W. The component functions reliably across an extended temperature range from -40 °C to +85 °C.

Full Half-Bridge (H Bridge) Drivers Feature Summary

• Integrates six independent output channels for complex motor drive configurations
• Supports PWM control signals up to 100 kHz for precise speed regulation
• Designed for low-power operation with minimal quiescent current consumption

Full Half-Bridge (H Bridge) Drivers Applications

• Multi-motor systems requiring synchronized channel control
• Automotive interior electronics such as seat adjustment actuators
• Industrial automation equipment with multiple DC motor loads

Full Half-Bridge (H Bridge) Drivers Procurement Notes

Verify the NRND status before integration, as this indicates the component is not recommended for new designs. Confirm that the HTSSOP-54 footprint matches your PCB layout constraints. Ensure thermal management strategies account for the 2 W power dissipation limit under expected load conditions. Check for moisture sensitivity classification requirements during storage and reflow soldering processes.

Full Half-Bridge (H Bridge) Drivers Selection Notes

Select this driver when a high channel count is required within a compact form factor. The 8 V maximum supply voltage limits suitability for higher voltage automotive main bus applications. Consider the 100 kHz frequency ceiling if faster switching speeds are necessary for reduced motor noise or size. Evaluate the 18 mA supply current against total system power budgets.

Full Half-Bridge (H Bridge) Drivers Part Context

This part belongs to ROHM's family of motor controllers and drivers, specifically targeting system-level power distribution for motion control. It complements single or dual H-bridge solutions by providing integrated multi-channel capability. The HTSSOP-54 package allows for dense board layouts compared to larger DIP alternatives.

Full Half-Bridge (H Bridge) Drivers Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided documentation. Due to the NRND status, alternative components should be evaluated based on pin compatibility and electrical specifications.