BKP0603HM330-T

Chip Ferrite Bead Overview

The BKP0603HM330-T is a multilayer chip bead inductor from Taiyo Yuden, designed for power line noise suppression. It features an impedance of 33 Ohms at a test frequency of 100 MHz with a tolerance of ±25%. The component supports a maximum DC current of 1 A and has a maximum DC resistance of 70 mOhms. Housed in a 0201 (0603 metric) SMD package measuring 0.6 mm x 0.3 mm x 0.3 mm, it operates within a temperature range of -55°C to +85°C.

Chip Ferrite Bead Feature Summary

• Multilayer construction for compact surface-mount integration
• Designed for high-current power line applications
• Low DC resistance to minimize signal loss

Chip Ferrite Bead Applications

• Power supply noise filtering
• High-current circuit protection
• Signal integrity maintenance in dense PCB layouts

Chip Ferrite Bead Procurement Notes

Verify the specific suffix 'HM' against official datasheets to confirm impedance and current ratings, as variations exist within the BKP series. Confirm RoHS compliance status through manufacturer documentation. Check end-of-life notifications, as availability may be restricted or discontinued. Ensure the 0201 footprint matches your design constraints before ordering.

Chip Ferrite Bead Selection Notes

Select this component when space is limited to a 0201 package but higher current handling than standard beads is required. The 33 Ohm impedance at 100 MHz targets specific noise frequencies. Compare the 1 A current rating against peak load requirements. Consider thermal performance within the -55°C to +85°C range for environmental suitability.

Chip Ferrite Bead Part Context

This part belongs to the BKP series of ferrite chip beads, specifically engineered for power lines. It utilizes multilayer technology to achieve high current capacity in a small form factor. The series is distinct from general-purpose signal line beads by its optimized magnetic material for power applications.

Chip Ferrite Bead Replacement Considerations

• BKP0603HS330-T

Chip Ferrite Bead FAQ

What is the test frequency for the specified impedance?

The impedance of 33 Ohms is measured at a test frequency of 100 MHz.

Does this component support high DC current loads?

Yes, it is rated for a maximum DC current of 1 A, suitable for power line applications.