BKP0603HS330-T

Chip Ferrite Bead Overview

The BKP0603HS330-T is a multilayer chip bead inductor from the Taiyo Yuden BK series, designed for power line applications. It features a 0201 (0603 metric) surface-mount package with dimensions of 0.6 mm length, 0.3 mm width, and 0.33 mm height. The component provides an impedance of 33 Ohms at a test frequency of 100 MHz with a tolerance of ±25%. It supports a maximum DC current of 1 A and has a maximum DC resistance of 70 mOhms. The operating temperature range spans from -55°C to +85°C.

Chip Ferrite Bead Feature Summary

• Multilayer construction optimized for high-current power line filtering
• Compact 0201 footprint suitable for space-constrained PCB layouts
• Low DC resistance minimizes voltage drop in power circuits

Chip Ferrite Bead Applications

• Power line noise suppression in portable electronic devices
• EMI filtering for high-speed digital signal lines
• Common mode noise reduction in compact consumer electronics

Chip Ferrite Bead Procurement Notes

Verify component authenticity through authorized distributors or direct manufacturer channels. Confirm RoHS compliance status and check for end-of-life notifications, as this specific part number may be subject to phase-out procedures. Ensure storage conditions adhere to moisture sensitivity level requirements prior to reflow soldering.

Chip Ferrite Bead Selection Notes

Select this component when low-profile power line filtering is required in 0201 footprints. Evaluate the 1 A current rating against peak load requirements to prevent saturation. Consider the 33 Ohm impedance at 100 MHz relative to target noise frequencies. Verify thermal performance within the specified -55°C to +85°C operational range for the intended environment.

Chip Ferrite Bead Part Context

This ferrite bead belongs to the BK series of multilayer chip bead inductors manufactured by Taiyo Yuden. The series focuses on providing effective electromagnetic interference suppression in compact form factors. The HS designation typically indicates high-current capability variants within the product line, distinguishing it from standard signal line beads.

Chip Ferrite Bead Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided documentation. Consult Taiyo Yuden technical support for qualified alternatives if this phase-out component is required.