BKP0603TM330-T

Chip Ferrite Bead Overview

The BKP0603TM330-T is a multilayer chip bead inductor from Taiyo Yuden, designed for power line applications. It features a 0201 (0603 metric) surface mount package with dimensions of 0.6 mm length, 0.3 mm width, and 0.33 mm height. The component provides an impedance of 33 Ohms at a test frequency of 100 MHz with a tolerance of ±25%. It supports a maximum DC current of 1.5 A and has a maximum DC resistance of 55 mOhms. The operating temperature range spans from -55°C to +85°C.

Chip Ferrite Bead Feature Summary

• Multilayer construction optimized for power line noise suppression
• Compact 0201 surface mount footprint for space-constrained designs
• High current handling capability suitable for power circuits

Chip Ferrite Bead Applications

• Power line noise suppression
• Electromagnetic interference filtering in compact electronics

Chip Ferrite Bead Procurement Notes

Verify the specific manufacturing date code and RoHS compliance status directly with Taiyo Yuden or authorized distributors before procurement. Confirm that the 0201 package dimensions align with your PCB footprint requirements. Ensure the 1.5 A current rating meets your circuit's peak load demands. Check for any end-of-life notices or alternative part recommendations from the manufacturer.

Chip Ferrite Bead Selection Notes

Select this component when a low-profile ferrite bead is required for high-current power lines. The 33 Ohm impedance at 100 MHz targets specific noise frequencies. Compare the 55 mOhms DCR against voltage drop constraints. Consider the -55°C to +85°C range against environmental conditions. Evaluate the 0201 size against available board real estate compared to larger packages like 0603.

Chip Ferrite Bead Part Context

This part belongs to the BKP series of multilayer chip bead inductors by Taiyo Yuden. These components are engineered specifically for suppressing electromagnetic interference on power supply lines. The series offers various impedance values and current ratings within standard SMD footprints to facilitate integration into modern electronic devices requiring effective noise control.

Chip Ferrite Bead Replacement Considerations

The BKP0603HS330-T is a related variant within the same series but typically rated for lower current (1 A). Verify if the reduced current capacity is acceptable for your application. Other manufacturers may offer equivalent 0201 ferrite beads, but pin compatibility and impedance curves must be validated.