BKP2125HS331-T

Chip Ferrite Bead Overview

The BKP2125HS331-T is a ferrite bead chip manufactured by Taiyo Yuden, designed for high-current applications with low DC resistance. It features an impedance of 330 Ohms at 100 MHz and supports a rated current of 1.5 A. The component has a maximum DC resistance of 75 mOhms and operates within a temperature range of -55°C to +85°C. It utilizes a 0805 (2012 metric) surface-mount package with dimensions of 2.00 mm x 1.25 mm x 0.85 mm.

Chip Ferrite Bead Feature Summary

• High current handling capability with low DC resistance design
• Effective electromagnetic interference filtering at 100 MHz
• Automotive grade reliability certification

Chip Ferrite Bead Applications

• Power line noise suppression in electronic circuits
• Electromagnetic compatibility filtering for automotive systems
• Signal integrity protection in high-current power traces

Chip Ferrite Bead Procurement Notes

Verify component authenticity through authorized distributors due to end-of-life status. Confirm RoHS compliance and AEC-Q200 certification requirements for your specific application. Check datasheet revisions for any parameter updates before finalizing designs.

Chip Ferrite Bead Selection Notes

Select this component when high current capacity and low insertion loss are required in a compact 0805 footprint. Ensure the 330 Ohm impedance matches your target noise frequency spectrum. Verify thermal management capabilities within the specified operating temperature range.

Chip Ferrite Bead Part Context

This part belongs to Taiyo Yuden's BK series of ferrite beads, specifically engineered for high-current power line applications. The HS designation indicates high-performance characteristics suitable for demanding environments. It serves as a critical component for EMI suppression in modern electronic systems requiring robust noise filtering.

Chip Ferrite Bead Replacement Considerations

ABPY00201209301Y00 by Pulse Electronics is listed as a similar alternative. Verify electrical parameters and physical dimensions match your design requirements before substitution.