BL 1 34 Z

Headers, Receptacles, Female Sockets Overview

The Fischer Elektronik BL 1 34 Z is a 34-position header connector designed for through-hole mounting. It features a 0.100-inch (2.54 mm) pitch and utilizes tin-plated contacts to ensure reliable electrical connections. The component is engineered with specific mechanical tolerances, including an insert depth of 1.55 mm and defined insertion and drawing forces of 1.5 N and 1.3 N respectively. Its volume resistance is specified at less than or equal to 10 mΩ. The connector supports plugability for circuit points ranging from 0.50 mm to 0.7 mm in diameter, providing a standardized interface for electronic assemblies.

Headers, Receptacles, Female Sockets Feature Summary

• Through-hole mounting configuration for secure board attachment
• Tin-plated contact surfaces for corrosion resistance
• Precision stamped contact spring design for consistent performance

Headers, Receptacles, Female Sockets Applications

• General-purpose electronic circuit interconnections
• Industrial control panel wiring
• Consumer electronics assembly

Headers, Receptacles, Female Sockets Procurement Notes

Verify the exact pin count and pitch against the schematic before ordering. Confirm that the target PCB footprint matches the 2.54 mm spacing requirement. Ensure the mating cable or wire diameters fall within the supported 0.50 mm to 0.7 mm range to guarantee proper engagement force and electrical continuity during assembly.

Headers, Receptacles, Female Sockets Selection Notes

Select this model when a 34-channel connection is required in a through-hole application. Consider the tin plating for general environments rather than high-corrosion zones. Evaluate the mechanical force requirements against the mating device capabilities to prevent damage during insertion. Compare against other Fischer Elektronik series if surface-mount options are preferred for automated manufacturing processes.

Headers, Receptacles, Female Sockets Part Context

Fischer Elektronik specializes in connectors and thermal management solutions. The BL series represents their line of precision-engineered stamped contact springs. This specific part belongs to the header connector segment, serving as a critical interface component in larger electronic systems manufactured by Fischer Elektronik GmbH & Co. KG.

Headers, Receptacles, Female Sockets Replacement Considerations

Direct substitutes must match the 34-pin count, 2.54 mm pitch, and through-hole package. Verify that alternative manufacturers provide identical volume resistance and force specifications to maintain system reliability without redesigning the PCB layout.