BRD1261C-TL

$1.17

Description：IC HALF BRIDGE DRV 1.7A INSOP24C
Series：BridgeSwitch
Mfr：Power Integrations
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:a43f8360dabe Category: Full Half-Bridge (H Bridge) Drivers Brand: Power Integrations

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

BRD1261C-TL is listed in the Full Half-Bridge (H Bridge) Drivers range at ChipApex. The manufacturer field lists Power Integrations. Its product description is IC HALF BRIDGE DRV 1.7A INSOP24C. Review the specifications below when checking this part for your BOM.

Full Half-Bridge (H Bridge) Drivers specifications for BRD1261C-TL

Description：IC HALF BRIDGE DRV 1.7A INSOP24C
Series：BridgeSwitch
Mfr：Power Integrations
Package：Tape & Reel (TR),Cut Tape (CT)
Output Configuration：Half Bridge
Applications：DC Motors, General Purpose
Interface：Analog, Logic, PWM
Load Type：Capacitive and Resistive
Technology：Power MOSFET
Rds On (Typ)：2.95Ohm LS, 2.95Ohm HS
Current - Output / Channel：1.7A
Current - Peak Output：-
Voltage - Supply：-
Voltage - Load：600V
Operating Temperature：-40°C ~ 150°C (TJ)
Features：Bootstrap Circuit
Fault Protection：Current Limiting, Over Temperature, Over Voltage
Mounting Type：Surface Mount
Package / Case：24-PowerSMD Module (0.425", 10.80mm Width), 17 Leads
Supplier Device Package：InSOP-24C
Grade：-
Qualification：-

Full Half-Bridge (H Bridge) Drivers datasheet and documents for BRD1261C-TL

BRD1261C-TL

Full Half-Bridge (H Bridge) Drivers Overview

The BRD1261C-TL is a high-voltage, self-powered half-bridge motor driver from the BridgeSwitch-2 family. It integrates two N-channel power FREDFETs with low and high-side drivers in an InSOP-24C package. Key electrical parameters include a maximum supply voltage of 50 V, a continuous output current of 1.7 A, and a peak current of 5.0 A. The device operates within a temperature range of -40°C to +150°C and supports a maximum inverter power rating of 300 W.

Full Half-Bridge (H Bridge) Drivers Feature Summary

Fully integrated half-bridge stage combining power switches and gate drivers
Self-powered operation eliminating the need for external bootstrap components
Integrated device protection and system monitoring capabilities

Full Half-Bridge (H Bridge) Drivers Applications

Brushless DC (BLDC) motor control
High-efficiency motor drive systems
Industrial motion control applications

Full Half-Bridge (H Bridge) Drivers Procurement Notes

Verify the specific suffix 'TL' indicates tape-and-reel packaging when ordering. Confirm the InSOP-24C package variant matches your PCB footprint requirements. Check for RoHS compliance status on the official datasheet before finalizing procurement specifications.

Full Half-Bridge (H Bridge) Drivers Selection Notes

Select this component for designs requiring a compact, high-efficiency solution without external heat sinks at rated currents. Ensure the input voltage stays within the 50 V maximum limit. Consider the 1.7 A continuous current rating against the load requirements to prevent thermal overload.

Full Half-Bridge (H Bridge) Drivers Part Context

This part belongs to the BridgeSwitch-2 series by Power Integrations. It is designed to replace discrete half-bridge solutions, offering higher efficiency and reduced bill of materials. The series focuses on simplifying motor driver design through integration.