ChipApex | Global Electronic Components Supplier
SEARCH
Search Product
Search Post
— IC芯片 | 连接器 | 传感器 | 被动器件 —
Consult the customer manager about the wholesale price.
consultation hotline：86-132-6715-2157
email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.
Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.
Product Detailed Parameters
- Description：OPTOISOLTR 5.3KV TRIAC 1CH 6-DIP
- Series：-
- Mfr：Vishay Semiconductor Opto Division
- Package：Tube
- Output Type：Triac
- Zero Crossing Circuit：No
- Number of Channels：1
- Voltage - Isolation：5300Vrms
- Voltage - Off State：800 V
- Static dV/dt (Min)：10kV/µs
- Current - LED Trigger (Ift) (Max)：2mA
- Current - On State (It (RMS)) (Max)：300 mA
- Current - Hold (Ih)：500µA
- Turn On Time：-
- Voltage - Forward (Vf) (Typ)：1.1V
- Current - DC Forward (If) (Max)：20 mA
- Operating Temperature：-40°C ~ 100°C
- Mounting Type：Through Hole
- Package / Case：6-DIP (0.300", 7.62mm)
- Supplier Device Package：6-DIP
- Approval Agency：CQC, UL
Download product information
Overview
The BRT13-H is a non-zero crossing phototriac output optocoupler from Vishay. It features a DIP-6 through-hole package with 5300 Vrms isolation voltage. Key electrical parameters include an 800 V off-state voltage (VDRM), 300 mA RMS on-state current (It RMS), and a maximum trigger current of 2 mA. The device operates within a temperature range of -40°C to +150°C, dissipating up to 600 mW. Forward current is rated at 20 mA with a typical forward voltage of 1.1 V.
Feature Summary
- Non-zero crossing triac output for immediate load control
- High insulation voltage of 5300 Vrms
- Robust static dV/dt rating of 10 kV/µs
- Wide operating temperature range up to 150°C
Applications
- Isolation of AC line voltages (120 VAC, 240 VAC, 380 VAC)
- Control of resistive, inductive, or capacitive loads
- Motor and solenoid drive circuits
- Triggering large current thyristors or TRIACs
Procurement Notes
Verify the specific suffix 'H' against the manufacturer's latest datasheet to confirm pinout and mechanical dimensions. Ensure the non-zero crossing characteristic aligns with the application requirements, as zero-crossing variants exist within the same family. Confirm RoHS compliance status via official documentation before integration.
Selection Notes
Select this component when immediate phase-angle control is required without zero-crossing delay. The high isolation voltage suits mains-connected applications. Compare the 300 mA RMS current limit against load requirements. Consider thermal management if operating near the maximum power dissipation limit of 600 mW.
Part Context
Part of the BRT13 series of AC optocouplers. This series integrates lateral power ICs with thyristor systems. The BRT13-H specifically denotes the non-zero crossing variant in the DIP-6 package, distinguishing it from zero-crossing models like the BRT23H.
Replacement Considerations
Direct substitutes may include other Vishay non-zero crossing phototriacs with similar voltage and current ratings. Verify pin compatibility and isolation voltage levels when cross-referencing with competitors.
