BTS50101EKBXUMA1

Description：IC PWR SWITCH N-CHAN 1:1 DSO-14
Series：PROFET®
Mfr：Infineon Technologies
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:d718fbbb6207 Category: Power Distribution Switches, Load Drivers Brand: Infineon Technologies

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

BTS50101EKBXUMA1 is listed in the Power Distribution Switches, Load Drivers range at ChipApex. The manufacturer field lists Infineon Technologies. Its product description is IC PWR SWITCH N-CHAN 1:1 DSO-14. Review the specifications below when checking this part for your BOM.

Power Distribution Switches, Load Drivers specifications for BTS50101EKBXUMA1

Description：IC PWR SWITCH N-CHAN 1:1 DSO-14
Series：PROFET®
Mfr：Infineon Technologies
Package：Tape & Reel (TR),Cut Tape (CT)
Switch Type：General Purpose
Number of Outputs：1
Ratio - Input:Output：1:01
Output Configuration：High Side
Output Type：N-Channel
Interface：On/Off
Voltage - Load：5V ~ 28V
Voltage - Supply (Vcc/Vdd)：Not Required
Current - Output (Max)：10A
Rds On (Typ)：10mOhm
Input Type：Non-Inverting
Features：-
Fault Protection：Current Limiting (Fixed), Open Load Detect, Over Temperature, Over Voltage
Operating Temperature：-40°C ~ 150°C (TJ)
Mounting Type：Surface Mount
Supplier Device Package：PG-DSO-14-47-EP
Package / Case：14-SOIC (0.154", 3.90mm Width) Exposed Pad
Grade：-
Qualification：-

Power Distribution Switches, Load Drivers datasheet and documents for BTS50101EKBXUMA1

BTS50101EKBXUMA1

Power Distribution Switches, Load Drivers Overview

The BTS5010-1EKB is a single-channel PROFET high-side power switch from Infineon Technologies, designed for automotive and industrial power distribution. It features an N-channel output capable of handling a continuous load current of 10 A with a maximum current limit of 50 A. The device operates within a supply voltage range of 5 V to 28 V and exhibits a maximum on-resistance of 10 mOhms. It is housed in a PG-DSO-14-47-EP surface-mount package with exposed pad. The component supports switching times up to 250 us and functions reliably across a junction temperature range of -40°C to +150°C.

Power Distribution Switches, Load Drivers Feature Summary

Integrated intelligent high-side switching with fixed current limiting and overload protection
Diagnostic capabilities including open-load detection for both high-side and low-side states
Automotive-grade reliability certified under AEC-Q100 standards

Power Distribution Switches, Load Drivers Applications

Automotive lighting systems
Power distribution units (PDU)
Industrial motor control circuits

Power Distribution Switches, Load Drivers Procurement Notes

Verify the complete part number including the XUMA1 suffix to ensure correct tape-and-reel packaging configuration. Confirm RoHS compliance status and moisture sensitivity level (MSL 3) requirements during storage and handling. Cross-reference datasheet revision dates to ensure compatibility with specific design-in requirements.

Power Distribution Switches, Load Drivers Selection Notes

Select this component for applications requiring robust high-side switching with integrated diagnostic feedback. The 10 A continuous current rating suits moderate-power loads. Ensure thermal management accounts for the 2 W power dissipation capability in the SOIC-14 package. Verify input logic levels match the non-inverting interface requirement.

Power Distribution Switches, Load Drivers Part Context

This device belongs to the PROFET 12V series, representing Infineon's intelligent power switch portfolio. It integrates power MOSFET technology with control and protection circuitry. The PG-DSO-14-47-EP package provides enhanced thermal performance through an exposed copper pad, facilitating efficient heat dissipation in compact PCB layouts.