C16-26.000-8-1010-R

Crystals Overview

The C16-26.000-8-1010-R is a surface-mount crystal oscillator manufactured by Aker Technology Corp. It operates at a fundamental frequency of 26 MHz with a frequency tolerance of ±10 ppm. The component features an 8 pF load capacitance and a maximum series resistance of 150 Ohms. It is housed in a compact 4-SMD, no lead package with dimensions of 1.60 mm x 1.20 mm. The device is designed for operation within a temperature range of -20°C to +70°C and complies with RoHS3 standards.

Crystals Feature Summary

• Compact 4-SMD surface-mount package for automated assembly
• Fundamental mode quartz crystal resonator
• RoHS3 compliant construction

Crystals Applications

• Microcontroller clock sources
• Communication module timing circuits
• Consumer electronics control boards

Crystals Procurement Notes

Verify the specific manufacturer designation on the final datasheet provided by Aker Technology USA Corporation. Ensure that the ordering suffix matches the required load capacitance and tolerance specifications. Confirm that the 4-SMD footprint aligns with the PCB design guidelines before procurement.

Crystals Selection Notes

Select this component when a 26 MHz reference signal is required for space-constrained designs. The 8 pF load capacitance must match the circuit's external capacitor values to ensure accurate frequency stability. Consider the 150 Ohm ESR limit when designing the oscillator circuit to guarantee reliable startup conditions.

Crystals Part Context

This part belongs to the C16 series of surface-mount crystals from Aker Technology Corp. These components are engineered for high-frequency stability in small form factors. The series supports various frequencies and load capacitances, providing standardized solutions for modern electronic applications requiring precise timing references.

Crystals Replacement Considerations

Direct substitutes include other 26 MHz SMD crystals with identical 4-SMD footprints, 8 pF load capacitance, and similar ESR limits. Verify mechanical dimensions and terminal plating compatibility before substitution.