C1E-19.200-6-3030-R

Crystals Overview

The C1E-19.200-6-3030-R is a surface-mount quartz crystal manufactured by Aker Technology Corp, designed for precise timing applications. It operates at a standard frequency of 19.2 MHz with a frequency tolerance and stability of ±30 ppm. The component features a load capacitance of 6 pF and a maximum series resistance of 120 Ohms. It utilizes a 4-SMD, no-lead package with dimensions of 3.2 mm in length, 2.5 mm in width, and 0.75 mm in height. The device supports an operating temperature range from -40°C to +85°C and complies with RoHS standards.

Crystals Feature Summary

• Surface-mount design with a compact 4-SMD no-lead package
• High frequency stability of ±30 ppm for reliable timing
• Wide operating temperature range suitable for industrial environments

Crystals Applications

• General-purpose clock generation circuits
• Microcontroller oscillator interfaces
• Communication module timing references

Crystals Procurement Notes

Verify the specific suffix 'R' against the manufacturer's official documentation to confirm reel packaging specifications. Ensure that the 6 pF load capacitance matches the target circuit design requirements. Cross-reference the 120 Ohm maximum series resistance with the oscillator driver strength to prevent over-driving. Confirm compliance with RoHS directives if required by the end product regulations.

Crystals Selection Notes

Select this component when a 19.2 MHz reference signal is required with moderate stability. The 6 pF load capacitance dictates compatibility with specific oscillator ICs or microcontroller pins. The 4-SMD form factor is suitable for automated assembly processes. Consider the ±30 ppm tolerance against system jitter budgets. Evaluate the 120 Ohm ESR relative to the available drive level capabilities of the host circuit.

Crystals Part Context

This part belongs to the C1E series of surface-mount crystals from Aker Technology Corp. The series offers various frequencies and package sizes for embedded timing needs. The C1E line focuses on cost-effective solutions for consumer and industrial electronics. Similar parts in the series may differ in frequency, capacitance, or physical dimensions while maintaining the same mounting style.

Crystals Replacement Considerations

Direct substitutes must match the 19.2 MHz frequency, 6 pF load capacitance, and 4-SMD footprint. Verify that alternative components meet the ±30 ppm stability and 120 Ohm ESR limits. Check for equivalent thermal performance within the -40°C to +85°C range. Ensure the replacement part adheres to the same RoHS compliance standards.