C1E-19.200-8-3030-R

Crystals Overview

The C1E-19.200-8-3030-R is a surface-mount quartz crystal manufactured by Aker Technology Corp. It operates at a standard frequency of 19.2 MHz with a frequency tolerance and stability of ±30 ppm. The component features an 8 pF load capacitance and an equivalent series resistance (ESR) of 120 Ohms. It is housed in a 4-SMD, no-lead package with dimensions of 2.00 mm in length, 1.60 mm in width, and 0.75 mm in height. The device supports an operating temperature range from -20°C to 70°C.

Crystals Feature Summary

• Surface-mount design for automated assembly
• Quartz resonator technology for stable oscillation
• Compact 4-SMD no-lead form factor

Crystals Applications

• Clock signal generation in microcontroller circuits
• Timing reference for communication interfaces
• Oscillator circuits in consumer electronics

Crystals Procurement Notes

Verify the specific operating temperature range against the official datasheet, as sources indicate variations between -20°C to 70°C and -40°C to 85°C. Confirm the exact package dimensions and ESR values prior to integration. Ensure compatibility with the target circuit's load capacitance requirements. Request the manufacturer's data sheet for final electrical parameter validation before procurement.

Crystals Selection Notes

Select this component when a 19.2 MHz surface-mount crystal is required. The ±30 ppm tolerance suits general timing applications. The 8 pF load capacitance must match the oscillator circuit design. Consider the 120 Ohm ESR for impedance matching. Verify thermal performance needs against the specified operating range.

Crystals Part Context

This part belongs to the C1E series of surface-mount crystals from Aker Technology Corp. Similar variants include C1E-19.200-8-1530-X-R and C1E-19.200-8-3030-X-R3. These components share the same fundamental frequency but may differ in packaging suffixes or specific environmental ratings. The series provides standardized solutions for embedded timing applications.

Crystals Replacement Considerations

Direct substitutes within the same series include C1E-19.200-8-1530-X-R and C1E-19.200-8-3030-X-R3. Cross-manufacturer replacements require matching 19.2 MHz frequency, 8 pF load capacitance, and compatible ESR. Verify package dimensions and pin configuration for mechanical fit.