C1E-20.000-10-3030-R

Crystals Overview

The C1E-20.000-10-3030-R is a surface-mount quartz crystal oscillator manufactured by Aker Technology Corp, operating at a standard frequency of 20 MHz. It features a four-terminal SMD package with dimensions of 2.00 mm in length and 1.60 mm in width. The component has a load capacitance of 10 pF and a series resistance of 120 Ohms. Frequency tolerance and stability are rated at ±30 ppm across an operating temperature range from -40°C to +85°C. The device complies with RoHS standards and is supplied in tape and reel packaging.

Crystals Feature Summary

• Surface-mount design for automated assembly
• High frequency stability within specified temperature range
• RoHS compliant construction

Crystals Applications

• General purpose clock generation circuits
• Microcontroller system timing references
• Digital communication interface synchronization

Crystals Procurement Notes

Verify the specific suffix 'R' indicates tape and reel packaging when ordering. Confirm that the 120 Ohm series resistance matches the circuit requirements. Ensure the 10 pF load capacitance aligns with the host oscillator circuit design. Check for RoHS compliance documentation if required for regulatory adherence.

Crystals Selection Notes

Select this component when a 20 MHz surface-mount crystal with ±30 ppm stability is required. The 10 pF load capacitance suits circuits designed for this specific value. Consider the 120 Ohm series resistance for impedance matching. Verify the 2.0 x 1.6 mm footprint fits the PCB layout constraints.

Crystals Part Context

This part belongs to the C1E series of surface-mount crystals from Aker Technology. Similar parts in the series include variants with different frequencies such as 24 MHz or different load capacitances like 12 pF. The C1E designation typically denotes a standard general-purpose crystal suitable for consumer and industrial electronics applications.

Crystals Replacement Considerations

Direct substitutes may include other 20 MHz SMD crystals with 10 pF load capacitance and similar dimensions. Verify electrical parameters match exactly before substitution. Cross-reference with manufacturer datasheets for pin compatibility and mounting specifications.