C1E-24.000-10-1015-R

Crystals Overview

The C1E-24.000-10-1015-R is a surface-mount quartz crystal oscillator manufactured by Aker Technology Corp. It operates at a fundamental frequency of 24 MHz with a standard tolerance of ±10 ppm. The component features a load capacitance of 10 pF and an equivalent series resistance (ESR) of 100 Ohms. It utilizes a 4-SMD, no-lead package with dimensions of 2.00 mm x 1.60 mm and a height of 0.75 mm. The device supports an operating temperature range from -20°C to 70°C and complies with RoHS standards.

Crystals Feature Summary

• Fundamental mode operation for stable frequency generation
• Surface-mount design for automated assembly integration
• RoHS compliant construction for environmental safety

Crystals Applications

• General-purpose clock signal generation in consumer electronics
• Timing reference for microcontroller-based systems
• Communication interface synchronization circuits

Crystals Procurement Notes

Verify the specific suffix 'R' against the manufacturer's official documentation to confirm tape and reel packaging requirements. Ensure that the ±10 ppm tolerance aligns with the target application's timing sensitivity. Cross-reference the 10 pF load capacitance with the host circuit design to prevent frequency deviation. Confirm the operating temperature range meets the environmental constraints of the final product deployment.

Crystals Selection Notes

Select this component when a compact 24 MHz timing source is required for space-constrained designs. The 4-SMD footprint facilitates high-density PCB layouts compared to through-hole alternatives. Consider the ±10 ppm stability for applications where moderate frequency accuracy is sufficient. Evaluate the 100 Ohm ESR to ensure compatibility with the driving circuit's oscillation requirements.

Crystals Part Context

This part belongs to the C1E series of surface-mount crystals from Aker Technology Corp. The series offers various frequency options within a standardized small outline package. Variants in this family may differ in frequency, tolerance, or packaging format, but share similar physical dimensions and mounting characteristics. The C1E designation indicates a specific form factor optimized for modern SMT production lines.

Crystals Replacement Considerations

Direct substitutes must match the 24 MHz frequency, 10 pF load capacitance, and 4-SMD 2.00x1.60mm footprint. Verify that alternative components support the same ±10 ppm tolerance and 100 Ohm ESR. Check if competitor parts offer compatible operating temperature ranges and RoHS compliance. Ensure pinout compatibility for seamless board requalification.