C2E-25.000-10-3030-X-M

Crystals Overview

The C2E-25.000-10-3030-X-M is a surface-mount quartz crystal oscillator manufactured by Aker Technology Corp. It operates at a standard frequency of 25 MHz with a frequency tolerance and stability of ±30 ppm. The component features a load capacitance of 10 pF and a maximum series resistance of 100 Ohms. It utilizes a 4-pin SMD package without leads, measuring 2.5 mm in length, 2.0 mm in width, and 0.75 mm in height. The device supports an operating temperature range from -40°C to +85°C and complies with RoHS standards.

Crystals Feature Summary

• Surface-mount design for automated assembly
• High frequency stability within specified temperature range
• RoHS compliant construction

Crystals Applications

• General purpose clock generation circuits
• Microcontroller system timing references
• Consumer electronic devices requiring stable oscillation

Crystals Procurement Notes

Verify the specific suffix 'X-M' against the manufacturer's current datasheet to confirm pin configuration and termination style. Ensure the load capacitance requirement of the target circuit matches the 10 pF specification. Confirm that the 100 Ohm maximum series resistance is compatible with the driving circuitry to prevent overdriving the crystal element.

Crystals Selection Notes

Select this component when a 25 MHz reference is required in a compact surface-mount footprint. The ±30 ppm tolerance suits applications not requiring high-precision timing. Compare the 100 Ohm series resistance against alternative crystals if lower drive levels are necessary. Verify the 10 pF load capacitance aligns with the host circuit's parasitic capacitance calculations.

Crystals Part Context

This part belongs to the C2E series of surface-mount crystals from Aker Technology Corp. The series offers various frequencies and package sizes optimized for space-constrained designs. The C2E-25.000 variant specifically targets the common 25 MHz clock frequency used in digital communication and processing systems.

Crystals Replacement Considerations

Direct substitutes must match the 25 MHz frequency, 10 pF load capacitance, and 4-pin SMD no-lead package dimensions. Verify equivalent electrical parameters including ±30 ppm tolerance and 100 Ohm max series resistance. Check for identical thermal ratings and RoHS compliance before substitution.