C2E-26.000-10-3030-R

Crystals Overview

The C2E-26.000-10-3030-R is a surface-mount quartz crystal manufactured by Aker Technology Corp, designed for precise timing applications. It operates at a standard frequency of 26 MHz with a frequency tolerance and stability of ±30 ppm. The component features a load capacitance of 10 pF and a maximum series resistance of 100 Ohms. It utilizes a four-pin SMD package with dimensions of 2.5 mm in length, 2.0 mm in width, and 0.75 mm in height. The device supports an operating temperature range from -40°C to +85°C and complies with RoHS standards.

Crystals Feature Summary

• Provides stable 26 MHz oscillation for digital circuit timing
• Compact surface-mount design suitable for space-constrained PCBs
• Operates reliably across extended industrial temperature ranges

Crystals Applications

• Microcontroller clock sources
• Communication module timing references
• Digital signal processing circuits

Crystals Procurement Notes

Verify the specific load capacitance requirement against the host oscillator circuit datasheet, as this component specifies 10 pF. Confirm that the ±30 ppm frequency stability meets the system's jitter and phase noise requirements. Ensure the 100 Ohm maximum series resistance is compatible with the driving circuit's power limits. Check for RoHS compliance documentation if environmental regulations apply to the final assembly.

Crystals Selection Notes

Select this component when a 26 MHz reference is required in a compact SMD form factor. Compare the 10 pF load capacitance against existing designs using 12 pF or other values to ensure circuit compatibility. Evaluate the ±30 ppm tolerance against stricter timing needs that might require lower ppm variants. Consider the physical footprint constraints relative to larger crystal packages available in the same series.

Crystals Part Context

This part belongs to the C2E series of surface-mount crystals from Aker Technology Corp. The series offers various frequencies and package sizes optimized for consumer electronics and industrial control systems. The C2E designation typically indicates a specific size and pin configuration distinct from the C1E or C3E series. These components are passive resonators requiring external amplifier circuits to function within electronic systems.

Crystals Replacement Considerations

Direct substitutes must match the 26 MHz frequency, 10 pF load capacitance, and 4-pin SMD dimensions. Verify equivalent electrical parameters such as series resistance and stability before substitution. Cross-reference with other manufacturers offering identical mechanical and electrical specifications to ensure functional interchangeability.