C4SMB-GGY-CX3Z47A1

Overview

The C4SMB-GGY-CX3Z47A1 is a single-color green LED from Cree LED, designed for through-hole mounting in a radial package. It features an oval lens with a diameter of 4mm and emits light at a wavelength of approximately 524nm to 540nm. The component exhibits a luminous intensity range of 5020mcd to 12000mcd. Electrical characteristics include a forward voltage of 3V and a maximum forward current of 35mA, with a typical operating current of 20mA.

Feature Summary

• Radial through-hole construction suitable for standard PCB assembly
• Oval lens design providing specific beam distribution characteristics
• High luminous intensity output optimized for visibility

Applications

• Bright sunlight indicator applications
• Low-power consumption outdoor equipment status indication
• General purpose panel mount signaling

Procurement Notes

Verify the specific luminous intensity bin (5020mcd vs 12000mcd) and exact peak wavelength (524nm vs 540nm) against the manufacturer's datasheet before procurement, as these parameters vary within the product family. Confirm that the radial lead spacing matches the target PCB footprint requirements to ensure mechanical compatibility during assembly.

Selection Notes

Select this component when a high-intensity green indication is required for through-hole designs. Consider the 3V forward voltage drop for circuit power budgeting. Evaluate the 4mm oval form factor against available board space constraints. Ensure the application environment supports the thermal characteristics of a standard through-hole LED without additional heat sinking.

Part Context

This part belongs to the C4SMB-GGY series of single-color LEDs manufactured by Cree LED. The series offers various intensity bins and wavelength options within the green spectrum. The CX3Z47A1 suffix denotes specific optical and electrical configurations distinct from other variants in the same physical package family.

Replacement Considerations

Direct substitutes must match the 4mm radial through-hole package and green emission spectrum. Verify equivalent forward voltage and current ratings to prevent circuit modification. Cross-reference specific intensity bins if brightness consistency is critical for the application.