CDC2510CPWR

Overview

The CDC2510CPWR is a Phase-Lock Loop (PLL) clock driver manufactured by Texas Instruments. It operates within a supply voltage range of 3V to 3.6V and supports a maximum frequency of 125MHz. The device features a 1:10 input-to-output ratio, converting a single clock input into ten synchronized outputs. It is housed in a 24-TSSOP package with a width of 4.40mm. The component is rated for an operating temperature range of 0°C to 70°C. This integrated circuit functions as a clock generator and frequency synthesizer, designed for surface-mount installation.

Feature Summary

• Integrates a PLL-based clock driver architecture for signal distribution
• Provides ten output channels from a single clock input source
• Operates on standard 3.3V logic power supplies

Applications

• Clock distribution in digital systems requiring multiple synchronized timing signals
• Frequency synthesis applications within the specified voltage and frequency limits
• System timing architectures utilizing CMOS or LVTTL compatible interfaces

Procurement Notes

Verify the specific suffix 'C' indicates the commercial temperature grade variant when sourcing replacements. Confirm the 24-TSSOP package dimensions match the target footprint. Ensure the design accommodates the 1:10 fixed ratio limitation. Check RoHS compliance status against current regulatory requirements for the intended market.

Selection Notes

Select this component when a fixed 1:10 division ratio is required without programmable configuration options. Compare against the CDCVF2510 series if power-down functionality is necessary. Verify that the 125MHz maximum frequency meets the system's highest clock requirement. Ensure the 0°C to 70°C operating range aligns with the environmental conditions of the final assembly.

Part Context

This part belongs to the Texas Instruments 2510 series of PLL clock drivers. It shares functional similarities with the CDCF2510 and CDCVF2510 families but differs in specific feature sets such as power management and temperature ratings. The 'PWR' suffix denotes the plastic TSSOP package type used for surface-mount technology applications.

Replacement Considerations

Publicly confirmed substitute part numbers include CDC2510PWR and CDC2510CPWRG4. These variants share the same core PLL driver functionality and pinout compatibility.