CIM10U800NC

Chip Ferrite Bead Overview

The Samsung Electro-Mechanics CIM10U800NC is a single-line ferrite bead designed for surface mount applications. It features a compact 0603 (1608 Metric) package with dimensions of 1.60mm x 0.80mm and a maximum height of 0.95mm. The component provides an impedance of 80 Ohms at 100 MHz, effectively suppressing high-frequency noise in electronic circuits. It supports a maximum current rating of 600mA and exhibits a maximum DC resistance of 100mOhm. The device operates reliably within a temperature range of -55°C to 125°C.

Chip Ferrite Bead Feature Summary

• Provides effective electromagnetic interference suppression through high impedance characteristics at target frequencies
• Designed for space-constrained surface mount layouts using standard 0603 footprint dimensions
• Capable of handling continuous direct current loads up to specified limits with minimal resistive loss

Chip Ferrite Bead Applications

• High-speed digital signal line filtering in consumer electronics
• Power supply input/output noise attenuation in portable devices
• EMI reduction in communication module interfaces

Chip Ferrite Bead Procurement Notes

Verify the obsolete part status before initiating procurement processes. Confirm that the Tape & Reel packaging aligns with automated assembly requirements. Ensure design-in decisions account for the availability of alternative components due to end-of-life status. Cross-reference impedance curves from official datasheets to validate performance under specific operating conditions.

Chip Ferrite Bead Selection Notes

Select this component when a low-profile solution is required for noise suppression on lines carrying moderate currents. The 0603 form factor suits dense PCB layouts where larger packages are impractical. Evaluate the 80 Ohm impedance specification against the target noise frequency spectrum to ensure adequate attenuation. Consider the 600mA current rating relative to the circuit's peak operational demands to prevent saturation or excessive heating.

Chip Ferrite Bead Part Context

This ferrite bead belongs to the CIM10 series from Samsung Electro-Mechanics, which focuses on compact passive components for modern electronics. The series emphasizes miniaturization while maintaining stable electrical characteristics across wide temperature ranges. These components support the trend toward smaller, more efficient device designs in mobile and industrial sectors.

Chip Ferrite Bead Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided documentation. Due to the obsolete status, engineers should consult manufacturer catalogs for next-generation replacements or equivalent specifications from other vendors.