CM7060R501R-10

Common Mode Chokes Overview

CM7060R501R-10 is a two-line common mode choke manufactured by Laird-Signal Integrity Products. It features a surface mount package with dimensions of 7.0mm length, 6.0mm width, and 2.0mm height. The component provides an impedance of 350 Ohms at 100 MHz and supports a maximum current rating of 5A. Its DC resistance (DCR) is maximized at 10mOhm. It operates within a temperature range of -40°C to +125°C.

Common Mode Chokes Feature Summary

• Dual-line configuration for differential signal filtering
• High current handling capability up to 5A
• Low DC resistance for minimal power loss
• Surface mount design for automated assembly

Common Mode Chokes Applications

• Differential data line protection
• Power supply input filtering
• Signal integrity enhancement in high-speed circuits

Common Mode Chokes Procurement Notes

Verify the manufacturer part number CM7060R501R-10 against official Laird datasheets to confirm specifications. Ensure compatibility with PCB footprint requirements for the 7.0x6.0mm package. Check RoHS compliance status if required by project standards. Confirm operating temperature range suitability for the intended environment.

Common Mode Chokes Selection Notes

Select this component when dual-line filtering is required for signals carrying up to 5A. The low DCR makes it suitable for power lines where voltage drop must be minimized. The 350 Ohm impedance at 100 MHz targets specific noise frequencies. Consider the physical size constraints of the application board.

Common Mode Chokes Part Context

This component belongs to the CM7060 series of common mode chokes from Laird-Signal Integrity Products. The series offers various impedance and current ratings in a standardized surface mount package. It is designed for EMI suppression in electronic systems requiring robust filtering capabilities.

Common Mode Chokes Replacement Considerations

Check for Laird part numbers within the CM7060 series that match the required impedance and current ratings. Verify pinout and footprint compatibility before substitution.