CM7560R-184

Common Mode Chokes Overview

The Delevan CM7560R-184 is a through-hole PC mount common mode choke designed for signal line filtering. It features a ferrite core with an inductance of 180 uH and a tolerance of ±25%. The component supports a maximum DC current of 2.2 A and has a maximum DC resistance of 38 mOhms. It operates within a temperature range of -55°C to +125°C. Physical dimensions are 27.2 mm length, 21.8 mm width, and 17 mm height, with a lead spacing of 5.1 mm.

Common Mode Chokes Feature Summary

• Radial through-hole construction for standard PCB mounting
• Ferrite core material for effective noise suppression
• Unshielded design suitable for general electromagnetic interference reduction

Common Mode Chokes Applications

• Signal line filtering in electronic circuits
• Common mode noise suppression in data transmission lines
• Electromagnetic interference mitigation in communication equipment

Common Mode Chokes Procurement Notes

Verify the specific manufacturer datasheet for the CM7560R-184 to confirm exact electrical tolerances and thermal ratings prior to integration. Ensure that the selected PCB footprint matches the 5.1 mm lead spacing and physical dimensions provided. Cross-reference the maximum DC current rating against the actual circuit load to prevent saturation or overheating during operation.

Common Mode Chokes Selection Notes

Select this component when a 180 uH common mode choke is required for low-frequency noise attenuation. The 2.2 A current rating makes it suitable for applications with moderate signal currents. Consider the unshielded nature if magnetic coupling with adjacent components must be minimized. Verify compatibility with the operating temperature range of the target environment.

Common Mode Chokes Part Context

This part belongs to the CM7560R series of PC mount common mode chokes manufactured by API Delevan. The series offers various inductance values tailored for different filtering requirements while maintaining consistent mechanical mounting standards. These components are categorized under inductors, chokes, and coils, specifically designed for through-hole assembly on printed circuit boards.

Common Mode Chokes Replacement Considerations

Consult official Delevan documentation for direct cross-references. No public substitute part numbers are confirmed in the available source material.