CM7560R-396

Common Mode Chokes Overview

The Delevan CM7560R-396 is a through-hole, PC mount common mode choke from the CM7560R series. It features a ferrite core and radial termination with a 10.2 mm lead spacing. The component provides an inductance of 39,000 uH (39 mH) at a test frequency of 1 kHz, with a tolerance of ±25%. It supports a maximum DC current of 440 mA and has a maximum DC resistance of 2.6 Ohms. The device operates within a temperature range of -55°C to +125°C and measures 27.2 mm in length, 21.8 mm in width, and 21.1 mm in height.

Common Mode Chokes Feature Summary

• Radial through-hole mounting for PCB integration
• Ferrite core construction for common mode noise suppression
• High inductance value suitable for low-frequency filtering

Common Mode Chokes Applications

• Data line filtering in electronic circuits
• Common mode noise suppression in signal lines
• Power supply input filtering applications

Common Mode Chokes Procurement Notes

Verify the specific inductance value and tolerance against design requirements, as the suffix indicates 39,000 uH. Confirm that the 440 mA current rating and 2.6 Ohm DC resistance are compatible with the target circuit's operational parameters. Ensure the physical dimensions and lead spacing fit the printed circuit board layout constraints.

Common Mode Chokes Selection Notes

Select this component when high inductance is required for common mode interference reduction in low-current signal paths. The unshielded design may require careful placement relative to sensitive components. Consider the thermal characteristics and operating temperature range to ensure reliability under expected environmental conditions.

Common Mode Chokes Part Context

This part belongs to the Delevan CM7560R series of PC mount common mode chokes. The series offers various inductance values tailored for different filtering needs while maintaining consistent physical dimensions and mounting styles. These components are designed for robust performance in industrial and commercial electronic equipment requiring effective electromagnetic interference mitigation.

Common Mode Chokes FAQ

What is the test frequency for the specified inductance?

The inductance of 39,000 uH is measured at a test frequency of 1 kHz.

Is the component shielded?

No, the CM7560R-396 is an unshielded common mode choke.