CMS-251472-24SP

Speakers Overview

The CMS-251472-24SP is a miniature general-purpose speaker manufactured by Same Sky. It features an oval, rectangular frame design suitable for compact electronic assemblies. The unit operates with a nominal impedance of 4 Ohms and handles a power rating of 2 Watts. Its frequency response spans from 576 Hz to 20 kHz, with a self-resonant frequency identified at 720 Hz. This component utilizes magnetic technology for audio output.

Speakers Feature Summary

• Compact oval and rectangular frame construction designed for space-constrained applications
• General-purpose magnetic technology for standard audio reproduction
• Wide frequency response range covering mid-range to high-frequency audio

Speakers Applications

• Consumer electronics requiring small form factor speakers
• Industrial control panels with limited mounting space
• Portable audio devices needing general-purpose sound output

Speakers Procurement Notes

Verify the specific acoustic performance requirements against the stated frequency range of 576 Hz to 20 kHz before procurement. Confirm that the 4 Ohm impedance matches the amplifier output specifications in the target system. Ensure the physical dimensions of the oval rectangular frame fit within the designated enclosure constraints. Check for RoHS compliance documentation if required by the end-product regulations.

Speakers Selection Notes

Select this model when a low-cost, general-purpose solution is needed for non-critical audio tasks. The 2W power handling is sufficient for short-range alert or voice announcements but not for high-fidelity music. Consider the 4 Ohm load when designing the driving circuitry to ensure adequate current supply without overheating the driver.

Speakers Part Context

This component belongs to the Same Sky miniature speaker lineup, formerly associated with CUI Devices. It serves as a basic audio output device for embedded systems where size is a primary constraint over acoustic quality. The product represents a standard off-the-shelf solution for manufacturers integrating simple audible feedback mechanisms into their hardware designs.

Speakers Replacement Considerations

Direct substitutes must match the 4 Ohm impedance and similar physical footprint. Verify that alternative models support the same 2W power rating and comparable frequency response ranges to maintain consistent audio performance in the final assembly.