CNY117F-1X016

Transistor, Photovoltaic Output Optoisolators Overview

The CNY117F-1X016 is a single-channel transistor output optocoupler manufactured by Vishay Semiconductor Opto Division. It features an NPN phototransistor output with no base connection, housed in a DIP-6 through-hole package. The device provides 5000 Vrms isolation voltage and operates within a temperature range of -55°C to +110°C. Key electrical parameters include a maximum collector-emitter voltage of 70 V, a maximum collector current of 50 mA, and a forward current of 60 mA. The typical rise and fall times are both 2 µs, with a power dissipation rating of 150 mW.

Transistor, Photovoltaic Output Optoisolators Feature Summary

• Provides galvanic isolation between input and output circuits via an infrared LED and NPN phototransistor pair.
• Features a no-base-connection phototransistor configuration for simplified circuit design.
• Rated for high operating temperatures up to 110°C, suitable for demanding industrial environments.
• Complies with international safety standards including UL, CSA, and EN certifications.

Transistor, Photovoltaic Output Optoisolators Applications

• Signal isolation in microprocessor systems
• Solid-state relay driver circuits
• Switching power supply feedback loops

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific suffix '1X016' against the official Vishay datasheet to confirm the exact Current Transfer Ratio (CTR) binning and packaging type. Ensure that the DIP-6 package dimensions match the target PCB footprint. Confirm RoHS compliance status for the specific manufacturing lot if required by project specifications.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when a single-channel isolation solution with a 5000 Vrms rating is required. The 50 mA collector current limit defines its suitability for low-to-medium load switching applications. Consider the 2 µs switching speed for moderate frequency signal transmission. The wide temperature range supports operation in harsh environmental conditions without derating concerns.

Transistor, Photovoltaic Output Optoisolators Part Context

This part belongs to the Vishay CNY series of optocouplers, which are widely used for general-purpose isolation. The CNY117 variant specifically denotes the transistor output type with no base terminal. The 'F' suffix typically indicates a specific CTR grade or packaging variation within the family, distinguishing it from standard CNY117 models.

Transistor, Photovoltaic Output Optoisolators Replacement Considerations

Direct replacements must maintain the 6-pin DIP package and 5000 Vrms isolation rating. Verify that substitute parts offer comparable CTR ranges and switching speeds. Check for pinout compatibility to ensure direct interchangeability without PCB redesign.