CNY17-4-060E

Transistor, Photovoltaic Output Optoisolators Overview

The CNY17-4-060E is a single-channel transistor output optocoupler manufactured by Broadcom Limited. It features a 6-pin DIP package with an isolation voltage of 5000 Vrms. The device operates within a temperature range of -55°C to +100°C and supports a maximum input forward current of 60 mA. Key electrical parameters include a collector-emitter voltage of 70V, a minimum current transfer ratio of 40% at 10mA input, and typical rise/fall times of 5µs/10µs.

Transistor, Photovoltaic Output Optoisolators Feature Summary

• Provides high-voltage electrical isolation between input and output circuits via optical coupling.
• Features a compact dual-in-line package suitable for through-hole mounting applications.
• Complies with international safety standards including UL, CSA, and IEC/EN/DIN EN 60747-5-2.

Transistor, Photovoltaic Output Optoisolators Applications

• Signal transmission isolation between circuits with different potentials or impedances
• Power supply feedback control loops
• System equipment and measurement instrument interfaces

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific suffix '060E' corresponds to the IEC/EN/DIN EN 60747-5-2 certified variant when sourcing. Confirm the package type matches the required 6-pin DIP configuration for your PCB layout. Ensure the manufacturer is identified as Broadcom Limited or Avago Technologies to guarantee component authenticity and traceability.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component for applications requiring moderate-speed switching with standard logic levels. The 5µs response time limits suitability for high-frequency data communication but supports general control signals. Consider the 5000 Vrms isolation rating for noise immunity in industrial environments where ground potential differences exist.

Transistor, Photovoltaic Output Optoisolators Part Context

This part belongs to the CNY17 series of transistor output optocouplers. The '4' indicates a single channel configuration, while the '060E' suffix specifies compliance with specific international safety regulations. The series is widely used in legacy and modern designs requiring reliable galvanic isolation for low-power signal transmission.

Transistor, Photovoltaic Output Optoisolators Replacement Considerations

Direct substitutes may include other single-channel transistor optocouplers with comparable isolation ratings and pinouts, such as the PC817 series or HCPL-2630, provided they meet the specific voltage and current requirements of the circuit design.

Transistor, Photovoltaic Output Optoisolators FAQ

What is the typical response time of the CNY17-4-060E?

The typical rise time is 5µs and the typical fall time is 10µs under specified test conditions.

Does the CNY17-4-060E have base output capability?

Yes, the datasheet describes it as an optoisolator with a transistor output that includes a base terminal for improved switching performance.