CNY17F2SR2M_F132

$0.20

Description：OPTOISO 4.17KV 1CH TRANS 6-SMD
Series：-
Mfr：onsemi
Package：Tape & Reel (TR)

SKU:2e9e237cebfd Category: Transistor, Photovoltaic Output Optoisolators Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

Product Detailed Parameters

Description：OPTOISO 4.17KV 1CH TRANS 6-SMD
Series：-
Mfr：onsemi
Package：Tape & Reel (TR)
Number of Channels：1
Voltage - Isolation：4170Vrms
Current Transfer Ratio (Min)：63% @ 10mA
Current Transfer Ratio (Max)：125% @ 10mA
Turn On / Turn Off Time (Typ)：2µs, 3µs
Rise / Fall Time (Typ)：4µs, 3.5µs (Max)
Input Type：DC
Output Type：Transistor
Voltage - Output (Max)：70V
Current - Output / Channel：50mA
Voltage - Forward (Vf) (Typ)：1.35V
Current - DC Forward (If) (Max)：60 mA
Vce Saturation (Max)：400mV
Operating Temperature：-40°C ~ 100°C
Mounting Type：Surface Mount
Package / Case：6-SMD, Gull Wing
Supplier Device Package：6-SMD

Download product information

CNY17F2SR2M_F132

Overview

The CNY17F2SR2M_F132 is a single-channel transistor output optocoupler manufactured by onsemi. It features an NPN phototransistor output with no base connection, housed in a surface-mount SMD-DIP-6 package. The device provides an insulation voltage of 4170 Vrms and supports a maximum collector-emitter voltage of 70 V. It operates within a temperature range of -40°C to +100°C and has a typical current transfer ratio ranging from 63% to 125%. The component is supplied in reel or cut tape formats.

Feature Summary

Provides electrical isolation via an internal LED and NPN phototransistor pair without a base terminal for simplified circuit integration.
Designed for surface-mount assembly using a compact six-pin SMD-DIP form factor suitable for automated placement.
Capable of handling high isolation voltages to protect low-voltage control circuits from high-voltage load sides.

Applications

Signal isolation in industrial automation control systems
Interface circuits for microcontrollers driving relay or motor loads
Power supply feedback loops requiring galvanic separation

Procurement Notes

Verify the specific suffix F132 against the official datasheet to confirm packaging and marking details. Confirm RoHS compliance status through the manufacturer's latest documentation. Check for any process change notifications regarding material composition or manufacturing site updates before finalizing procurement plans.

Selection Notes

Select this component when a surface-mount solution is required for standard transistor output isolation. Ensure the 4170 Vrms isolation rating meets the system safety requirements. Verify that the 70 V collector-emitter voltage and 50 mA collector current limits are sufficient for the intended load application.

Part Context

This part belongs to the CNY17 series of optocouplers produced by onsemi. The series is widely used for general-purpose signal isolation. The SR2M suffix indicates the specific surface-mount variant with defined packaging characteristics distinct from through-hole DIP versions.