CPCO-4000-160-RMS

Current Sensors Overview

The CPCO-4000-160-RMS is a DC-AC current probe from the GMW Associates CPCO Series, designed for clamp-on measurement of high electric currents. It features an open-loop sensor type with a 160mm aperture, enabling non-intrusive monitoring without primary circuit disconnection. The device supports bidirectional AC and DC current sensing with a range of ±4000A. It provides electrical isolation for safe operation in high-voltage environments.

Current Sensors Feature Summary

• Clamp-on design allows for non-intrusive current measurement without breaking the primary circuit
• Capable of measuring both AC and DC currents using an open-loop sensor technology
• Provides electrical isolation between the measured conductor and the output signal

Current Sensors Applications

• High current monitoring in industrial power systems
• Electric vehicle battery management system testing
• Power electronics development and validation

Current Sensors Procurement Notes

Verify the specific ordering suffix to ensure the correct output configuration matches your system requirements. Confirm that the 160mm aperture size accommodates the target conductor diameter. Check datasheet specifications for supply voltage and linearity tolerances before integration into control loops or data acquisition systems.

Current Sensors Selection Notes

Select this model when measuring currents up to ±4000A with a large conductor requiring a 160mm opening. Consider the open-loop architecture for cost-effective solutions where extreme precision is not critical. Ensure the application environment supports the required supply current and output interface compatibility.

Current Sensors Part Context

This component belongs to the CPCO Series of DC-AC current probes manufactured by GMW Associates. The series offers various aperture sizes and current ranges to accommodate different conductor dimensions and measurement needs. The CPCO-4000-160-RMS specifically addresses high-current applications requiring wide aperture access.

Current Sensors Replacement Considerations

Alternative models within the CPCO series may offer different aperture sizes or current ranges. Verify that any substitute part maintains the required ±4000A range and 160mm aperture. Cross-reference output signal types and supply requirements to ensure system compatibility.