CPPC7-A7BP-149.86TS

Oscillators Overview

The CPPC7-A7BP-149.86TS is a CMOS output clock oscillator manufactured by Cardinal Components Inc., operating at a nominal frequency of 149.86 MHz. It features a surface-mount package with four pins and physical dimensions of 7.0mm x 5.0mm x 1.7mm. The device supports a supply voltage range of 3V to 3.6V, with a typical load capacitance of 15 pF. Frequency stability is rated at ±50 ppm, and it operates within a temperature range of -20°C to +70°C. Rise and fall times are specified at 4 ns.

Oscillators Feature Summary

• Field programmable blank oscillator capability allowing for custom frequency programming
• Supports tri-state output functionality for enable and disable control
• Capable of being programmed twice using specific field programming series

Oscillators Applications

• General purpose digital clock signal generation
• Embedded system timing references
• Communication equipment synchronization

Oscillators Procurement Notes

Verify the part number suffix TS indicates tri-state output and tube packaging as documented. Confirm the A7BP code corresponds to the -20°C to +70°C operating temperature range and ±50 ppm stability rating. Ensure compatibility with the PG-3000 or PG-3100 programming series if field programming is required. Check RoHS compliance status e3 or e4 based on specific manufacturing batch data.

Oscillators Selection Notes

Select this component when a 149.86 MHz CMOS clock source is required in a 4-pin SMD footprint. Consider the ±50 ppm stability requirement against application tolerance needs. Evaluate the 3V to 3.6V supply voltage range against available power rails. Verify that the tri-state feature is necessary for bus management or power saving in the target design.

Oscillators Part Context

This oscillator belongs to the FIPO™ CPP series from Cardinal Components Inc., designed as field-programmable blank oscillators. The series allows customization of frequency within defined limits using dedicated programming hardware. The CPPC7 variant specifically denotes a ceramic package style with full-size dimensions, distinguishing it from plastic or half-size alternatives in the same family.

Oscillators Replacement Considerations

Direct substitutes must match the 149.86 MHz frequency, CMOS output type, and 4-pin SMD package. Verify identical supply voltage ranges and stability ratings. Tri-state functionality must be confirmed for equivalent control capabilities. Cross-reference package dimensions to ensure board layout compatibility.