CPPC7L-A3B6-66.667TS

Oscillators Overview

The CPPC7L-A3B6-66.667TS is a field-programmable blank oscillator from the Cardinal Components Fipo series, designed for surface mount applications. It features a CMOS output and operates on a 3.3 V supply voltage. The device provides a nominal frequency of 66.667 MHz with a stability of ±100 ppm. It utilizes a ceramic package measuring 7.0 mm x 5.0 mm x 1.7 mm. Key functional attributes include tri-state output capability and an enable/disable function.

Oscillators Feature Summary

• Field programmable architecture allowing rapid instrument programming
• CMOS output interface with tri-state control
• Enable and disable functionality for power management

Oscillators Applications

• General purpose clock signal generation
• Digital system timing references
• Embedded electronics requiring programmable frequencies

Oscillators Procurement Notes

Verify the specific operating temperature range and frequency tolerance against project requirements before procurement. Confirm that the 3.3 V supply voltage aligns with the target circuit design. Ensure the ceramic SMD package dimensions fit the available PCB footprint. Check for RoHS compliance status if environmental regulations apply to the final assembly.

Oscillators Selection Notes

Select this component when a precise 66.667 MHz clock is required in a compact surface mount form factor. The tri-state feature allows for bus sharing or controlled signal gating. Consider the ±100 ppm stability for standard digital timing needs. Verify compatibility with PG-3000 or PG-3100 programmers if field programming is necessary.

Oscillators Part Context

This part belongs to the Cardinal Components Fipo series of field programmable blank oscillators. These devices are programmed using dedicated tools like the PG-3000 or PG-3100. The series offers various voltage options and package styles, with this specific model providing a 3.3 V CMOS output in a standard ceramic SMD housing.

Oscillators Replacement Considerations

Direct substitutes within the same series require matching the 3.3 V supply, CMOS output type, and ±100 ppm stability. Verify physical package compatibility (7.0mm x 5.0mm) and pinout alignment. Frequency-specific replacements must maintain the 66.667 MHz nominal value.