CPPC7LZ-A7BP-10.0TS

Oscillators Overview

The CPPC7LZ-A7BP-10.0TS is a CMOS output clock oscillator manufactured by Cardinal Components Inc. It operates at a nominal frequency of 10.0 MHz with a frequency stability of ±50 ppm. The device supports a supply voltage range from 3.0 V to 3.6 V, with a typical operating voltage of 3.3 V. It features tri-state outputs and is housed in a ceramic surface-mount package measuring 7.0 mm x 5.0 mm x 1.7 mm. The unit is designed for operation within a temperature range of -40 °C to +85 °C.

Oscillators Feature Summary

• Features tri-state output capability for enable/disable control
• Utilizes a full-size ceramic surface-mount package
• Supports field programmable blank oscillator technology

Oscillators Applications

• General-purpose digital system clocking
• Embedded controller timing references
• Communication interface synchronization

Oscillators Procurement Notes

Verify the specific ordering suffix against the manufacturer's current part numbering guide to ensure correct configuration. Confirm that the required frequency stability and operating temperature range align with the application requirements before procurement. Check for RoHS compliance status if environmental regulations apply to the end product.

Oscillators Selection Notes

Select this component when a fixed 10.0 MHz CMOS clock signal is required with tri-state functionality. Ensure the design accommodates the 3.3 V nominal supply voltage and the specified ceramic package dimensions. Consider the ±50 ppm stability requirement for timing-sensitive applications.

Oscillators Part Context

This oscillator belongs to the CPP series of field programmable blank oscillators from Cardinal Components Inc. The series allows for on-the-fly programming using dedicated instruments. The 'C' indicates CMOS output, '7' denotes the 5x7 ceramic package, 'L' specifies 3.3 V operation, 'A7' indicates the extended temperature range, 'BP' confirms ±50 ppm stability, and 'TS' signifies tri-state output.

Oscillators Replacement Considerations

Direct replacements must match the 10.0 MHz frequency, CMOS output type, 3.3 V supply, and 5x7 ceramic package. Verify compatibility of pinout and electrical characteristics with the target circuit design.