CPPT7-B6-29.5TS

Oscillators Overview

The CPPT7-B6-29.5TS is a field-programmable blank oscillator manufactured by Cardinal Components Inc. It features a TTL output signal and operates at a nominal frequency of 29.5 MHz. The device utilizes a surface-mount ceramic package with four pins, measuring 7.0mm x 5.0mm x 1.7mm. It supports a supply voltage range from 3V to 3.6V, with a typical operating voltage of 5V. The unit includes tri-state functionality for enable/disable control and offers a frequency stability of ±100 ppm. It is RoHS compliant and lead-free.

Oscillators Feature Summary

• Field programmable blank oscillator capable of being programmed twice using PG-3000 or PG-3100 series programmers.
• Features tri-state output enabling precise enable and disable control for power management.

Oscillators Applications

• General clock generation in digital systems
• Embedded controller timing references
• Industrial instrumentation clocks

Oscillators Procurement Notes

Verify the specific programming requirements before procurement, as this is a blank oscillator requiring field configuration. Confirm that the necessary PG-3000 or PG-3100 programming equipment is available for setup. Ensure the application circuitry supports the TTL output levels and the specified 5V supply voltage. Check for any specific environmental constraints regarding the -40°C to +85°C operating temperature range.

Oscillators Selection Notes

Select this component when a customizable clock frequency within the 0.5MHz to 133MHz range is required. The TTL output interface suits legacy or specific logic families requiring compatible drive levels. The ceramic SMD package provides a compact solution for space-constrained designs. Consider the ±100 ppm stability if high precision is not critical.

Oscillators Part Context

This part belongs to the CPP series of field-programmable blank oscillators from Cardinal Components. These devices allow designers to program the exact frequency post-manufacturing, offering flexibility compared to fixed-frequency crystals. The series supports various output types including CMOS and TTL, packaged in standard ceramic SMD formats.

Oscillators Replacement Considerations

Direct replacements must match the TTL output type, 4-pin ceramic SMD package, and 5V supply requirement. Verify that substitute parts support the same field-programmable nature or provide the fixed 29.5MHz frequency directly. Ensure compatibility with the PG-series programming tools if reprogramming is needed.