CR9350-ACA-M

$36.62

Description：SENSOR CURRENT SWITCH 100A SCR
Series：CR9300
Mfr：CR Magnetics Inc.
Package：Bulk

SKU:370b42d742e1 Category: Current Sensors Brand: CR Magnetics Inc.

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

CR9350-ACA-M is listed in the Current Sensors range at ChipApex. The manufacturer field lists CR Magnetics Inc.. Its product description is SENSOR CURRENT SWITCH 100A SCR. Review the specifications below when checking this part for your BOM.

Current Sensors specifications for CR9350-ACA-M

Description：SENSOR CURRENT SWITCH 100A SCR
Series：CR9300
Mfr：CR Magnetics Inc.
Package：Bulk
For Measuring：AC
Sensor Type：Current Switch
Current - Sensing：100A
Number of Channels：1
Output：SCR
Sensitivity：-
Frequency：50Hz ~ 400Hz
Linearity：-
Accuracy：-
Voltage - Supply：Self Powered
Response Time：100ms (On), 250ms (Off)
Current - Supply (Max)：-
Operating Temperature：-30°C ~ 60°C
Grade：-
Qualification：-
Polarization：Bidirectional
Mounting Type：-
Package / Case：Module, Single Pass Through
Supplier Device Package：-

Current Sensors datasheet and documents for CR9350-ACA-M

CR9350-ACA-M

Current Sensors Overview

The CR9350-ACA-M is a solid-state AC current switch manufactured by CR Magnetics Inc. It features a split-core design with a single pass-through configuration for non-invasive installation. The device detects AC currents up to 100A and provides a normally open solid-state output. It supports bidirectional measurement and operates with a maximum off-state voltage of 240VAC RMS. Key electrical parameters include a 100ms turn-on response time and a 250ms turn-off response time. The unit is RoHS compliant and lead-free, designed for module mounting applications.

Current Sensors Feature Summary

Solid-state switching output for reliable contactless control
Split-core design enabling easy installation around conductors
Bidirectional detection capability for alternating current flow

Current Sensors Applications

Motor protection circuits requiring overcurrent detection
Industrial automation systems monitoring AC load status
Power distribution panels for circuit supervision

Current Sensors Procurement Notes

Verify the specific output type and voltage ratings against system requirements before procurement. Confirm that the 240VAC RMS maximum off-state voltage aligns with the controlled circuit's electrical specifications. Ensure the split-core aperture matches the conductor diameter for proper magnetic coupling. Check compliance documentation for RoHS and lead-free status if required by project standards.

Current Sensors Selection Notes

Select this component when a non-contact AC current monitoring solution is needed for loads up to 100A. The split-core architecture simplifies retrofitting into existing wiring without disconnecting conductors. Consider the bidirectional nature if reverse power flow or alternating direction sensing is necessary. Evaluate the solid-state output compatibility with downstream control logic or relay inputs.

Current Sensors Part Context

This model belongs to the CR Magnetics current sensor family, specifically designed as an AC current switch. It differs from current transmitters by providing a binary switching output rather than a proportional analog signal. The split-core variant facilitates maintenance and installation in confined spaces where solid-core sensors cannot be threaded onto cables.