CS18-01P95-04-1X

Speakers Overview

The CS18-01P95-04-1X is a general-purpose electromagnetic speaker manufactured by Challenge Electronics. It features an 8-ohm impedance and a power handling capacity of 1 watt. The frequency response ranges from 760 Hz to 20 kHz, with a resonant frequency specified at 950 Hz in some documentation. The unit has a rectangular form factor measuring 18.0 mm by 13.0 mm with a height of 4.5 mm. It offers a sound pressure level of 100 dB and utilizes solder point termination for circuit integration.

Speakers Feature Summary

• Rectangular top port design suitable for compact enclosures
• Solder pad termination for direct PCB mounting
• High efficiency acoustic output rated at 100 dB

Speakers Applications

• Mobile electronic devices
• General purpose audio signaling
• Compact consumer electronics

Speakers Procurement Notes

Verify the specific datasheet version when ordering, as manufacturer specifications may be subject to change without notice. Confirm that the solder point termination style matches your printed circuit board layout requirements. Ensure the operating temperature range of -20°C to 70°C aligns with your intended environmental conditions before finalizing procurement decisions.

Speakers Selection Notes

Select this component when a low-profile rectangular speaker is required for mobile or space-constrained applications. The 8-ohm impedance is standard for many audio driver circuits. Consider the 1-watt power rating for low-volume signaling rather than high-fidelity music reproduction. The 100 dB sensitivity allows for adequate volume levels with minimal amplifier drive current.

Speakers Part Context

This model belongs to the Challenge Electronics CS18 series of electromagnetic speakers. The series is characterized by compact dimensions and general-purpose audio capabilities. The CS18-01P95-04-1X variant specifically denotes the 8-ohm impedance and rectangular physical configuration within this product line.

Speakers Replacement Considerations

Direct substitutes must match the 18x13x4.5 mm dimensions, 8-ohm impedance, and 1-watt power rating. Verify that any replacement maintains the same solder point termination style and similar frequency response characteristics to ensure mechanical and electrical compatibility.